Cisco AIR-BR1410A-A-K9 - Aironet 1410 Wireless Bridge Информационный лист - Страница 7
Просмотреть онлайн или скачать pdf Информационный лист для Сетевое оборудование Cisco AIR-BR1410A-A-K9 - Aironet 1410 Wireless Bridge. Cisco AIR-BR1410A-A-K9 - Aironet 1410 Wireless Bridge 12 страниц. Wireless bridge
Печатать страницу
See Table 1 for additional features and benefits. For system specifications of the Cisco Aironet 1400 Series Wireless
Bridge see Table 2, for product specifications see Table 3.
Table 1
Features and Benefits
Feature
802.11a radio with 24 dBm (250 mW)
maximum transmit power, -68 dBm
receive sensitivity at 54 Mbps data rate
Industry-leading security, network
management, and software feature set
Fully weatherized metal housing
and extended operating temperature
(-30 to 55 ºC or -22 to 131 ºF)
The Cisco Aironet Power Injector LR
Flexible mounting with multifunction
mount or optional roof/wall mount
Wireless root bridge
Wireless non-root bridge
All contents are Copyright © 2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Benefit
The 5.8 GHz radio in the Cisco Aironet 1400 Series offers superior radio
performance that results in industry-leading range. The greater the range,
the higher the supported data rate or the more reliable the link at a given
data rate.
The Cisco Aironet 1400 Series software builds on the feature-rich,
customer-driven Cisco Aironet software, including 802.1X support with
mutual authentication and dynamic encryption keys; management
through SNMP , Telnet, and Web browsers.
The rugged weatherproof design of the Cisco Aironet 1400 Series
provides flexibility for deployment in a variety of settings. The rugged
features and broad operating temperature range support deployment in
factories, warehouses, and the outdoors.
The Power Injector LR converts the standard 10/100 baseT Ethernet
category 5 RJ-45 interface that is suitable for weather-protected areas
to a dual F-Type connector interface for dual coax cables that are more
suitable for harsh outdoor environments. While providing a 100baseT
interface to the Cisco Aironet 1400 Series, the Power Injector LR also
provides power to the unit over the same cables with a power discovery
feature that protects other appliances from damage should they
accidentally be connected. As an added benefit to the installer, Auto MDIX
is built in, allowing the dual cables to be swapped and while maintaining
the same functionality. To support longer cable runs from your
infrastructure network switch or router, the Power Injector LR is designed
to accommodate 100 m coaxial cable run plus 100 m of indoor cat5 cable,
to enable total cable runs up to 200 meters. Lightning and surge
protection is also included at the F-Type connector interface to provide
added protection to your network infrastructure devices.
The Cisco Aironet 1400 Series Multifunction Mount allows the captured
antenna Cisco Aironet 1400 Series to provide either horizontal or vertical
polarization. With its quick-hang feature, the mount will support the
weight of the bridge during the alignment process. To assist the
installation, hoisting rings are attached to the mount. The mount will
interface to poles or masts from 1.5 in. to 2.5 in. while allowing for
elevation and azimuth alignment. For the connectorized version, the
mount provides a wall mount mechanism. The captured antenna Cisco
Aironet 1400 Series can be mounted to a wall, roof, or other flat surface
with the addition of the optional Cisco Aironet 1400 Series Roof/Wall
Mount kit.
The wireless root bridge role provides the Cisco Aironet 1400 Series with
support for both point-to-point or point-to-multipoint bridging
The wireless non-root bridge allows the Cisco Aironet 1400 Series to
operate as the remote node in a point-to-point or point-to-multipoint
bridge network.
Cisco Systems, Inc.
Page 7 of 12