Cisco Aironet 340 Series Краткое руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сетевое оборудование Cisco Aironet 340 Series. Cisco Aironet 340 Series 13 страниц. Usb client adapter
Также для Cisco Aironet 340 Series: Краткое руководство по эксплуатации (12 страниц), Информация о выпуске (14 страниц), Краткое руководство по эксплуатации (16 страниц), Краткое руководство по эксплуатации (12 страниц), Краткое руководство по эксплуатации (12 страниц)

Connecting to a Telephone Line

If the base station is configured to use the

optional built-in telephone modem, follow

these steps:

Connect the end of the telephone cable

with a ferrite bead (small cylinder) to

the RJ-11 TELCO connector on the

back of the base station.

Connect the other end of the cable to

the telephone wall connector.

Connecting the Power

Adapter

The base station does not have an on/off switch. Power is applied when the power adapter is

plugged into the unit and connected to the wall outlet.

Follow these steps to connect the power adapter to the base station:

Connect the power adapter to a suitable power receptacle.

Connect the power connector to the back of the base station.

The base station begins the power-on self-test (POST).

The base station begins the power-on self-test (POST) when power is supplied. LEDs show the

progress of the test. The LEDs appear red, amber, and green to indicate the status of the POST.

When the unit is powered on for the first time or if it has been reset to all default parameters,

the indicators display the following sequence:

•

The Radio LED blinks several times.

•

The Status LED continuously flashes an

amber color at a fast rate, indicating that

the base station is set to factory defaults

and is waiting for a wireless device to

communicate configuration settings to

it.

Telephone

jack

Telephone

cable

ET HE RN

TE LC O

5V DC

Network/Modem

Status

Radio