Sony XCD-SX90CR Руководство по эксплуатации - Страница 14

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Цифровая камера Sony XCD-SX90CR. Sony XCD-SX90CR 30 страниц. Digital camera module
Также для Sony XCD-SX90CR: Руководство (4 страниц), Техническое руководство (38 страниц), Техническое руководство (39 страниц), Инструкция по эксплуатации (2 страниц)

1-8. Unleaded Solder

Boards requiring use of unleaded solder are printed with a

lead free mark (LF) indicating the solder contains no

lead.(Caution: Some printed circuit boards may not come

printed with the lead free mark due to their particular size.)

: LEAD FREE MARK

. Be sure to use the unleaded solder for the printed circuit

board printed with the lead free mark.

. The unleaded solder melts at a temperature about 40 dC

higher than the ordinary solder, therefore, it is recom-

mended to use the soldering iron having a temperature

regulator.

. The ordinary soldering iron can be used but the iron tip

has to be applied to the solder joint for a slightly longer

time. The printed pattern (copper foil) may peel away if

the heated tip is applied for too long, so be careful.

1-8

XCD-U100/SX90/V60

XCD-U100CR/SX90CR/V60CR