Sony CFD-S70 Инструкция по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Стереосистема Sony CFD-S70. Sony CFD-S70 2 страницы. Personal audio system
Также для Sony CFD-S70: Инструкция по эксплуатации (2 страниц)
Печатать страницу
3
Press
Note
to start recording (the play button
The selected CD play mode is cleared in the following
will depress automatically at the same
situations.
time).
– The AC power cord is unplugged.
– The batteries are removed.
When recording from a disc
– When you open the CD compartment cover.
Playback starts automatically and recording of
– When you turn off the power of the unit.
all the tracks/files on the disc proceeds from
the first track/file. When the tape reaches the
Playing tracks/files repeatedly (Repeat
end, recording stops automatically.
Play)
When recording a radio program or
You can set the unit to repeatedly play CD-DA tracks
sound from a connected optional
on an audio CD, MP3 files on a CD-R/CD-RW disc, in
component
normal and program play modes.
Recording continues until the tape reaches the
1
Press
to turn on the power of the unit,
end.
and place a disc in the CD compartment.
2
Note
Proceed as follows.
When the time set on the Sleep Timer has elapsed during
To repeat
Do this
recording, the "SLEEP" indicator will start flashing but the
unit will not turn off. The unit will turn off after the end of
1 Press PLAY MODE
A single track/
recording.
repeatedly until "
file
2 Press or to select
Tips
a track/file that you want to
Adjusting the volume or the audio emphasis will not
repeat. When you want to
affect the recording level.
specify a folder that contains
If the AM program makes whistling sound after you have
MP3 files, press TUNE/
press in step 3, press PLAY MODE repeatedly to
– first to select a folder, and
select the position of ISS (Interference Suppress Switch)
then press or to
that may decreases the noise.
select a file.
Other operations
3 Press CD PLAY/PAUSE ()
.
To
Do this
1 Press PLAY MODE
Press .
All tracks/files
Stop recording
repeatedly until " " appears.
Press . To resume
Pause recording
2 Press CD PLAY/PAUSE ()
recording, press the button
.
again.
1 Press PLAY MODE
A selected folder
repeatedly until " " and " "
on an MP3 disc
To record starting from a specific track/file
appear.
Press or to select the track/file on the
2 Select a folder by pressing
disc, then press .
+ or − .
TUNE/
Playback starts automatically, and recording of the
3 Press CD PLAY/PAUSE ()
selected track/file and the following tracks/files
.
proceeds until the tape reaches the end.
Programmed
1 Program tracks/files (see
tracks/files
"Creating your own program
To record from partway through the current
(Program Play)").
CD-DA track or MP3 file
2 Press PLAY MODE until
Press CD PLAY/PAUSE () to pause playback
"PGM" and " " appear on the
where you want to start recording, then press .
display.
3 Press CD PLAY/PAUSE ()
To record favorite CD-DA tracks or MP3 files
.
on a disc
Create a program (see "Creating your own program
(Program Play)"), then press to start recording.
To cancel Repeat Play
Press STOP ( )
to stop playback, and then press
To erase recorded cassette tapes
PLAY MODE
repeatedly until " " (or "
To erase a cassette tape, you need to record silence
disappears from the display.
over the previous recording.
Playing tracks/files in random order
1
Press
to turn on the power of the unit.
(Shuffle Play)
2
Insert a recorded tape into the cassette tape
You can set the unit to play CD-DA tracks on an
compartment.
audio CD, MP3 files on a CD-R/CD-RW disc in
3
Press
.
random order.
Erasing process starts, and previous recording is
1
Press
to turn on the power of the unit,
overwritten with silent data.
and place a disc in the CD compartment.
2
Press PLAY MODE
repeatedly until " "
appears on the display.
Other Operations
3
Press CD PLAY/PAUSE ()
Play.
To cancel Shuffle Play
Selecting the CD play mode
Press STOP ( )
to stop playback, and then press
PLAY MODE
repeatedly until "
from the display.
You can select the CD play mode while a disc is
Tip
stopped.
During Shuffle Play, you cannot select the previous track/file
Check the following items before selecting the
by pressing
.
CD play mode. If you try to set or change the
play mode during playback, "PUSH STOP" will
Creating your own program (Program
appear.
When a disc is playing, be sure to stop
Play)
playback by pressing STOP ( )
.
You can arrange the playing order of up to 25
If you have switched to the CD function from
tracks/files on a disc.
another function by pressing CD PLAY/PAUSE
1
Press
to turn on the power of the unit,
( ) , press STOP ( )
once to stop
and place a disc in the CD compartment.
playback.
2
Press PLAY MODE
repeatedly until "PGM"
appears on the display.
Press PLAY MODE
repeatedly.
3
Press or
to select a track/file.
When you want to specify a folder that contains
MP3 files, press TUNE/
+ or −
folder, and then press or
file.
4
Press DISPLAY/ENTER
.
Each time you press the button, the indication
The track/file is programmed and the program
changes as follows:
step number appears.
Normal play (None)
(Example: audio CD)
Single repeat (
1)
All repeat (
)
Step number
Selected folder play (
)*
5
Repeat steps 3 and 4 to program additional
tracks/files.
Selected folder repeat play (
,
)*
6
Press CD PLAY/PAUSE ()
Program Play.
Shuffle play (
)
To play the same program again, press
CD PLAY/PAUSE ()
.
Program play (PGM)
Note that the created program is cleared in the
following cases:
When you open the CD compartment cover.
Program repeat play (
, PGM)
When you turn off the power of the unit in the
CD function.
* These functions are available only when playing MP3 files
on an MP3 disc.
Note
If you try to program 26 tracks/files or more, "FULL" flashes
on the display.
To display programmed track/file
Checking the remaining battery
information
After creating your own program, you can check
power
information about programmed tracks/files.
Press STOP ( )
to stop playback, and then press
When using the unit on battery power, you can
DISPLAY/ENTER
repeatedly. The display changes
check how much battery power remains.
as follows:
Total number of steps Last programmed track/
Battery levels and remaining battery
file number
power
The remaining battery power is displayed in 5 levels
To cancel Program Play
as shown below (battery icons are for illustrative
Press STOP ( )
to stop playback, and then press
purposes only). The higher the number, the more
PLAY MODE
repeatedly until "PGM" disappears
battery power remains.
from the display.
Full
To delete all tracks/files in the current
program
Stop playback, and then press STOP ( )
.
"noSTEP" appears and you can create a new
program, following the procedure "Creating your
1" appears.
own program (Program Play)."
Using the Sleep Timer
+ or
You can set the unit to turn off automatically after a
set time has elapsed.
1
Press SLEEP
.
After the "LO-BATT" alert flashes for 8 seconds,
The default setting ("90") appears and the
the unit will turn off automatically.
"SLEEP" indicator lights up on the display.
2
Press SLEEP
repeatedly to select the
To check the battery level, perform the following.
desired setting.
When using the CD or FM/AM function
Press DISPLAY/ENTER
When using the tape or audio in function
Press DISPLAY/ENTER
Each time you press the button, the duration (in
minutes) changes on the display, and the
About the battery alert message
selected setting is confirmed automatically after
When the battery power drops to a certain level, the
about 4 seconds.
message "LO-BATT" will flash for 8 seconds and then
the unit power will go off automatically. Replace all
To cancel the Sleep Timer
the batteries with new ones when this message
Press SLEEP
repeatedly to select "OFF" or turn off
the unit.
appears.
Tips
The "SLEEP" indicator will flash once every 8 seconds
while the Sleep Timer is activated.
The "SLEEP" indicator will start flashing on the display
about 1 minute before the unit turns off.
You can check the time left until the unit turns off by
Note
1")
pressing SLEEP
again after setting the Sleep Timer.
If you turn the unit on again without replacing the batteries
However, be sure not to perform this operation while the
after "LO-BATT" appears, you may be able to use some
"SLEEP" indicator is flashing (flashing starts 1 minute
function such as the tuner for a short period of time, but the
before the unit turns off). If you perform this operation
following issues may occur. Replace the batteries with new
during this time, the Sleep Timer will be canceled instead
ones when "LO-BATT" appears.
of displaying the time remaining.
The unit turns on but then turns off after "LO-BATT"
When the set time has elapsed during a tape function
operation (playing/recording/erasing), the "SLEEP"
The unit will not turn on.
indicator will start flashing but the unit will not turn off.
The unit will turn off after the operation ends.
Be sure to release the or button by pressing
Cleaning the tape heads and tape
after the unit is turned off when a fast-forward or
rewind operation is performed in the tape function.
path
Be sure to turn off the power of the optional component
connected to the AUDIO IN jack when using the Sleep
Timer in the audio in function. The Sleep Timer does not
to start Shuffle
Failure to clean the tape heads can cause degraded
turn off the component power.
sound quality or inability of the unit to play or record
tapes. Clean the capstan, pinch roller, play/recording
head, and erase-head after every 10 hours of use
Connecting optional components
using a commercially available cleaning kit. Clean
their surfaces as shown below using a cotton swab
" disappears
moistened with cleaning fluid included in the kit.
You can enjoy the sound from an optional
component, such as a TV, portable digital music
To clean the pinch roller, capstan and
player, through the speakers of this unit.
play/recording head
Be sure to turn off the power of each component
before making any connections.
Press
For details, refer to the instruction manual of the
To clean the erase-head
component to be connected.
Press
1
Connect the AUDIO IN jack
to the line
with your finger, and then perform cleaning (
output jack of the portable digital music
player, TV or other component using an audio
connection cable (not supplied).
2
Turn the connected component on.
3
Press AUDIO IN
and start playing sound on
the connected component.
The sound from the connected component is
output from the speakers.
first to select a
to select a
To connect the unit to a TV or video recorder/
player, use an extension cable (not supplied) with
a stereo-mini jack on one end and two phono
plugs on the other end.
to start
Precautions
Discs that this unit CAN play
1
Audio CD (CD-DA*
tracks)
CD-R/CD-RW discs on which CD-DA tracks are
recorded in CD-DA format.
CD-R/CD-RW that contains MP3 files and is
2
finalized*
correctly.
*1
CD-DA is the abbreviation for Compact Disc Digital Audio.
It is a recording standard used for audio CDs.
*2
Finalizing is the process to make the CD-R/CD-RW discs
playable on the consumer disc player products, and the
finalizing can be enabled or disabled as optional settings
during disc creation in most recording software.
Discs that this unit CANNOT play
CD-R/CD-RW other than those recorded in audio
CD format or formats conforming to ISO 9660
Level 1/Level 2 or Joliet
CD-R/CD-RW of poor recording quality, CD-R/
CD-RW with scratches or that is dirty, or CD-R/
CD-RW recorded using an incompatible recording
device
Empty
CD-R/CD-RW that is unfinalized or finalized
incorrectly
BD-ROM, BD-R/BD-RE
DVD-ROM, DVD-R/DVD-RW, DVD+R/DVD+RW,
DVD-RAM
Notes on discs
Clean the CD with a cleaning cloth if
the disc is dirty. Wipe the disc from
the center out. If there are scratches,
repeatedly.
dirt or fingerprints on the disc, a
tracking error may occur.
Do not use solvents such as
once.
benzine, thinner, commercially
available cleaners or anti-static
spray intended for vinyl LPs.
Do not expose the CD to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as there can be a
considerable rise in temperature inside the car.
Do not stick paper or a sticker on the CD, or
scratch the surface of the CD.
After playing, store the CD in its case.
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side. However,
since the audio material side does not conform to
the Compact Disc (CD) standard, playback on this
product is not guaranteed.
Music discs encoded with copyright
flashes for 8 seconds.
protection technologies
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
Notes on cassettes
Remove the overwrite protection tab from side A
or B to prevent accidental recording. If you want
to reuse the tape for recording, cover the broken
tab using adhesive tape.
Side A
(
) and then perform cleaning (
).
Tab for side A
(
) while holding down the lever (
)
Tab for side B
).
The use of a cassette tape with more than
90 minutes of play time is not recommended
except for long, continuous recording or playback.
On safety
As the laser beam used in the CD player section is
harmful to eyes, do not attempt to disassemble
the casing. Refer servicing to qualified personnel
only.
Should any solid object or liquid fall into the unit,
unplug the unit, and have it checked by qualified
personnel before operating it any further.
Discs with non-standard shapes (e.g., heart,
Lever
square, star) cannot be played on this unit.
Attempting to do so may damage the unit. Do not
use such discs.
Use a cotton
swab
On power sources
moistened
For AC operation, use the supplied AC power cord;
with cleaning
do not use any other cord.
fluid.
Unplug the unit from the wall outlet if it is not to
be used for an extended period of time.
Pinch roller
Erase-head
When not using the batteries, remove them to
avoid damage that can be caused by battery
leakage or corrosion.
Capstan
Play/recording
On placement
head
Do not leave the unit in a location near heat
sources, in a place subject to direct sunlight,
excessive dust or mechanical shock, or in a car
subject to the direct rays of the sun.
Do not place the unit near the appliances that
generate heat, such as lighting fixtures or heaters.
The heat from those appliances may deform the
enclosure and cause the system to malfunction.
Do not place the unit on an inclined or unstable
surface.
Do not place anything within 10 mm of the rear of
the cabinet. The ventilation openings must be
unobstructed for the unit to operate properly and
prolong the life of its components.
Since a strong magnet is used for the speakers,
The sound may drop out or noise may be heard
keep personal credit cards using magnetic coding
when using a poor quality CD-R/CD-RW or if there
or spring-wound watches away from the unit to
is a problem with the recording device or
prevent possible damage from the magnet.
application software.
On operation
Starting playback takes more time than
usual.
If the unit is brought directly from a cold to a
warm location, or is placed in a very damp room,
The following discs take a longer time to start
moisture may condense on the lens inside the CD
playback.
player section. Should this occur, the unit will not
A disc recorded with a complicated tree
operate properly. In this case, remove the CD and
structure.
wait about an hour for the moisture to evaporate.
A disc that has many folders, files or non-MP3
files.
On handling the unit
Do not leave the CD compartment open to avoid
Radio
dust and debris contamination.
When carrying the unit, hold it by the handle
to
The sound is weak or reception is poor.
prevent it from dropping.
Replace all the batteries with new ones.
Move the unit away from nearby TVs.
For FM reception, extend the antenna to its full
length, and reorient it for best FM reception. For
AM reception, reorient the unit itself to find the
best reception.
If you are in a building, listen near a window.
If a mobile phone is placed close to the unit, a
loud noise may be heard from the unit. Keep the
phone away from the unit.
The TV picture is unstable.
On cleaning the cabinet
If you are listening to an FM program near a TV
Clean the cabinet, panel and controls using a soft
with an indoor antenna, move the unit away from
cloth slightly moistened with a mild detergent
the TV.
solution. Do not use any type of abrasive pad,
scouring powder, or solvent, such as alcohol or
Tape
benzine.
The tape does not move when you press an
If you have any questions or problems concerning
operation button.
your unit, consult your nearest Sony dealer.
Close the cassette compartment cover securely.
Noise is heard during playback.
Troubleshooting
This is not a malfunction. You may hear
background noise ("hissing noise"), mechanical
noise, or noise due to electromagnetic
interference in the playback.
General
The
button does not function or the
"LO-BATT" flashing message appears on the
tape does not start playback or recording.
display.
Make sure that the overwrite protection tab has
Replace all the batteries with new ones. This
not been removed.
message appears when using the unit on
batteries and the battery power drops to a certain
Poor or distorted playback, recording or
level.
erasing quality.
Clean the capstan, pinch roller, play/recording
The power does not turn on.
head and erase-head. See "Cleaning the tape
Make sure the AC power cord is connected to the
heads and tape path" for details.
wall outlet securely.
Demagnetize the heads using a commercially
Make sure the connector of AC power cord is
available tape head demagnetizer.
inserted into the AC IN jack securely.
Use Type I (normal) tapes only. Type II (high
Check if the batteries are inserted correctly,
position), Type III (ferro-chrome) and Type IV
matching the polarities.
(metal) tapes are not supported.
There is no sound.
After trying the suggested remedies, if the problem
Make sure the appropriate function is selected for
persists, unplug the AC power cord or remove all the
the music or sound source you want to listen to.
batteries. After all the indications on the display
Unplug the headphones when listening through
disappear, plug in the AC power cord again, or
speakers.
re-insert the batteries. If the problem persists,
consult your nearest Sony dealer.
The sound is noisy.
Is someone using a mobile phone or other
equipment emitting radio waves near the unit? If
so, move the unit away from such devices.
Specifications
A small humming noise is heard from the
radio.
CD player section
This is not a malfunction. You may hear a small
System
humming noise from the radio depending on the
Compact disc digital audio system
status of the power supply.
Laser diode properties
Emission duration: Continuous
Laser output: Less than 44.6 μW
CD player
(This output is the value measurement at a distance of
200 mm from the objective lens surface on the optical
The CD player does not play even when a
pick-up block with 7 mm aperture.)
CD is in place.
Number of channels
2
Place the CD with the label side up.
Frequency response
Clean the CD.
20 Hz 20,000 Hz +1/–2 dB
Take out the CD and leave the CD compartment
Wow and flutter
open for about an hour to dry moisture
Below measurable limit
condensation.
Supported audio format
The CD-R/CD-RW is blank or unfinalized.
MP3 (MPEG 1 Audio Layer-3)
There are no playable MP3 files on the disc.
Radio section
There is a problem with the quality of the CD-R/
Frequency range
CD-RW, recording device or application software.
FM: 87.5 MHz 108 MHz (50 kHz step)
AM: 531 kHz 1,602 kHz (9 kHz step)
"noCD" appears when the disc is loaded.
Intermediate frequency
FM: 128 kHz
No disc is set in the CD compartment. Set a disc.
AM: 45 kHz
The CD may have a reading problem. Replace the
Antennas
disc.
FM: Telescopic antenna
The CD may be placed upside down. Place the
AM: Built-in ferrite bar antenna
disc with the label side up.
Tape deck section
An unplayable disc (DVD, BD, etc.) is loaded.
Recording system
Replace the disc.
4-track 2-channel, stereo
Fast winding time
"00" appears on the display when the disc
Approx. 150 s (sec.) with Sony cassette C-60
Frequency response
is loaded.
Type I (normal): 80 Hz – 10,000 Hz
No audio files recorded in supported formats, or a
Input
file to be played back has an unsupported file
AUDIO IN
extension.
Stereo mini jack
"Err" appears when the disc is loaded.
Output
(headphones) stereo mini jack
The CD may be dirty. Clean the disc.
For 16
32
impedance headphones
The CD may have scratches. Replace the disc.
General
The CD may have a reading problem. Replace the
Speaker
disc.
Full range, 8 cm dia., 4
, cone type (2)
A blank disc may be set in the CD compartment.
Power output
1.7 W + 1.7 W (at 4
, 10% harmonic distortion)
The sound drops out.
Power requirements
Models for Europe and Oceania
Reduce the volume.
230 V AC, 50 Hz (AC power supply)
Clean the CD, or replace it if the CD is badly
9 V DC (6 R14 (size C) batteries)
damaged.
Other models
Place the unit in a location free from vibrations.
220 V 240 V AC, 50/60 Hz (AC power supply)
9 V DC (6 R14 (size C) batteries)
Clean the lens with a commercially available
blower.
Power consumption
11 W
Less than 1 W (during standby mode)
1,
2
Battery Life*
*
Playback of CD
Approx. 10 hours (at a volume level of around 23)
Recording FM programs
Approx. 23 hours
Playback of tape
Approx. 15 hours (at a volume level of around 23)
*
1
Measured by Sony standards. The actual battery life
may vary depending on the circumstances of the unit
or operating conditions.
*
2
When using Sony alkaline batteries.
Dimensions
Approx. 310 mm × 140 mm × 212 mm (W/H/D) (incl.
projecting parts)
Mass
Approx. 1.9 kg (excl. batteries)
Approx. 2.3 kg (incl. batteries)
Quantity
Unit: 1
Supplied accessories
AC power cord (1)
Design and specifications are subject to change without
notice.
License and Trademark Notice
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Other trademarks and trade names are those of
®
their respective owners. In this manual, ™ and
marks are not specified.