Sony MHC-GT22 Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереосистема Sony MHC-GT22. Sony MHC-GT22 44 страницы.
Печатать страницу
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antennas.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
Subwoofer (MHC-GT55/GT44 only)
Insert only the stripped portion of the
cords into the SUB WOOFER OUT jacks.
Speakers
Insert only the stripped portion of the
cords into the SPEAKER jacks.
D-LIGHT SYNC OUT jack (Except for
Oceanian model)
Use the D-LIGHT SYNC controller to
connect to this jack. You need to connect
the D-LIGHT SYNC controller to the
lighting device* (not supplied). The
lighting device will react according to
control signals transmitted by the D-
LIGHT SYNC controller upon receiving
music source from the system. For details
on the use of D-LIGHT SYNC controller
and lighting device, refer to the respective
operating instructions supplied with the
respective device.
* Refer to the D-LIGHT SYNC controller
operating instruction for the recommended
lighting device.
Note
The lighting effect may be different depending
on the connected lighting device or the type of
music being played back.
10
GB
Power
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Connect the power cord to a wall socket.
The demonstration appears in the display.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
When carrying this system
1
Remove all discs to protect the CD
mechanism.
2
Press CD
to select the CD
function.
3
Hold down
and press /
"STANDBY" appears.
4
After "LOCK" appears, unplug the
power cord.
on the unit,
on the unit until