Sony MHC-RG595 Инструкция по эксплуатации
Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Стереосистема Sony MHC-RG595. Sony MHC-RG595 2 страницы. Mini hi-fi component system
Также для Sony MHC-RG595: Руководство по эксплуатации (28 страниц)
Печатать страницу
Mini Hi-Fi
Component System
Operating Instructions
MHC-RG595
© 2007 Sony Corporation
Printed in China
WARNING
This appliance is
classified as a CLASS
1 LASER product. This
To reduce the risk of fire or electric
marking is located on the
rear exterior.
shock, do not expose this apparatus to
rain or moisture.
Don't throw away the battery
with general house waste,
To prevent fire, do not cover the ventilation of the
dispose of it correctly as
apparatus with news papers, table-cloths, curtains, etc.
chemical waste.
And don't place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Note on DualDiscs
Install this system so that the power cord can be
A DualDisc is a two sided disc product which mates
unplugged from the wall socket immediately in the event
DVD recorded material on one side with digital
of trouble.
audio material on the other side. However, since the
audio material side does not conform to the Compact
Do not install the appliance in a confined space, such
Disc (CD) standard, playback on this product is not
as a bookcase or built-in cabinet.
guaranteed.
Batteries or batteries installed apparatus shall not be
exposed to excessive heat such as sunshine, fire or the
like.
Hooking up the system securely
When carrying this system
1
Remove all discs to protect the CD mechanism.
2
Press CD
to select the CD function.
3
Hold down on the unit, and press /
on the unit until
"STANDBY" appears.
4
After "LOCK" appears, unplug the power cord.
FM lead antenna
(Extend it horizontally.)
Subwoofer
Place the subwoofer vertically to obtain a better bass
reproduction. Also, position the subwoofer:
Brown side for
– on a solid floor where resonance is unlikely to occur.
other regions
– at least a few centimeters away from the wall.
– away from the center of the room or place a bookshelf
White side for North
against a wall, to avoid generating a standing wave.
American model
Speakers and subwoofer
Subwoofer
Attach the supplied speaker pads to the bottom of the
front speakers and subwoofer to prevent slipping.
Front speaker
Front speaker (right)
Subwoofer
Music discs encoded with
3
Attach the supplied parallel blade plug (Type A).
copyright protection technologies
2-899-691-13(1)
This product is designed to playback discs that
conform to the Compact Disc (CD) standard. Recently,
various music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
GB
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.
Note on power cord plug shapes (Saudi
Arabian model only)
For AC 220 V wall sockets:
1
Make the appropriate voltage setting on the
system. (only for models with a voltage selector)
2
Make sure that the 13 A 3-pin plug (Type BF) is
securely attached to the power cord. (The 13 A
3-pin plug is attached when shipped from the
factory.)
For AC 127 V wall sockets:
1
Make the appropriate voltage setting on the
system. (only for models with a voltage selector)
2
Remove the 13 A 3-pin plug using a
screwdriver.
Antennas
Find a location and an orientation that provide
good reception, and then set up the antenna.
Keep the antennas away from the speaker cords
to avoid picking up noise.
AM loop antenna
or
Speakers and subwoofer
Insert only the stripped portion of the
cord.
Solid (Red/)
Striped (Black/)
Solid (Red/)
Striped (Black/)
Front speaker (left)
Basic Operations
Before using the system
To use the remote
Slide and remove the battery compartment lid
insert the two supplied R6 (size AA) batteries, side
first, matching the polarities shown below.
Notes on using the remote
• With normal use, the batteries should last for about six months.
• Do not mix an old battery with a new one or mix different types of
batteries.
• If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
To set the clock
1
Turn on the system.
Press (on/standby)
.
2
Select the clock set mode.
Press CLOCK/TIMER SET
on the remote. If the
current mode appears on the display, press /
repeatedly to select "CLOCK SET" and then press
ENTER
.
3
Set the time.
Press /
repeatedly to set the hour, and
then press ENTER
. Use the same procedure to set
the minutes.
When you turn off the system after setting the clock,
the clock display appears instead of the demonstration
display.
The clock settings are lost when you disconnect the
power cord or if a power failure occurs.
Selecting a music source
Press the following buttons (or press FUNCTION
the remote repeatedly).
To select
Press
CD
CD
.
Tuner
TUNER/BAND
.
Power
Tape (deck A or B)
TAPE on the remote (or
TAPE A/B on the unit)
For models with a voltage selector, set
Component (connected
AUDIO IN
on the unit.
VOLTAGE SELECTOR to the local
using an audio cord)
power line voltage.
Connect the power cord to a wall
socket. The demonstration appears in
the display.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
* Saudi Arabian model: 120 – 127 V
Wall socket
• The maximum number of:
Adjusting the sound
– folders is 150 (including the root folder).
– MP3 files is 255.
– MP3 files and folders that can be contained on a single disc is 300.
To adjust the volume
– folder levels (the tree structure of files) is 8.
• Compatibility with all MP3 encoding/writing software, recording
Press VOLUME +/– on the remote (or turn the
device, and recording media cannot be guaranteed. Incompatible
VOLUME control on the unit)
.
MP3 discs may produce noise or interrupted audio or may not play
at all.
To add a sound effect
Notes on playing multisession discs
To
Press
• If the disc begins with a CD-DA (or MP3) session, it is recognized
Reinforce the bass and
as a CD-DA (or MP3) disc, and playback continues until another
GROOVE
on the unit
session is encountered.
create a more powerful
repeatedly until "GROOVE"
• A disc with a mixed CD format is recognized as a CD-DA (audio)
sound
appears.
disc.
Set the surround effect
SURROUND
on the unit
repeatedly until "SURR"
appears.
Listening to the radio
Select the preset sound
EQ on the remote (or
1
effect
PRESET EQ on the unit)
Select "FM" or "AM."
repeatedly. To cancel,
Press TUNER/BAND
press EQ on the remote (or
2
Select the tuning mode.
PRESET EQ on the unit)
repeatedly until "EQ OFF"
Press TUNING MODE
appears.
appears.
3
Tune in the desired station.
To turn on the subwoofer
Press +/– on the remote (or TUNING +/– on the unit)
Press SUBWOOFER
on the unit repeatedly until
. Scanning stops automatically when a station is
"SUB ON" appears. The SUBWOOFER indicator
on
tuned in, and then "TUNED" and "STEREO" (for
the unit lights up. If you later disconnect the subwoofer,
stereo programs) appear.
repeat the procedure until "SUB OFF" appears. The
volume of the subwoofer is linked to the front speakers.
Playing a CD/MP3 disc
To stop automatic scanning
1
Select the CD function.
Press (stop)
.
Press CD
.
To tune in a station with a weak signal
2
Place a disc.
If "TUNED" does not appear and the scanning does
Press (open/close)
on the unit, and place a disc
not stop, press TUNING MODE
with the label side up on the disc tray.
"AUTO" and "PRESET" disappear, and then press
+/– on the remote (or TUNING +/– on the unit)
repeatedly to tune in the desired station.
To reduce static noise on a weak FM stereo
station
Press FM MODE
"MONO" appears to turn off stereo reception.
To insert additional discs, press DISC SKIP
to
, and
rotate the disc tray.
Playing a tape
To close the disc tray, press (open/close)
on the
unit again.
1
Do not force the disc tray closed with your finger, as
Select a tape deck.
this may damage the unit.
Press TAPE (or TAPE A/B on the unit)
3
Start playback.
2
Insert a tape.
Press (play) on the remote (or (play/pause)
Press PUSH
on the unit)
.
I (normal) tape into the cassette holder with the side
you want to play facing forward. Make sure there is
To
Press
no slack in the tape to avoid damaging the tape or
Pause playback
(pause) on the remote (or
the tape deck. Press PUSH
(play/pause) on the unit)
close the cassette holder.
. To resume play, press the
3
Start playback.
button again.
Press (play) on the remote (or (play/pause)
Stop playback
(stop)
.
on the unit)
. Do not eject the tape during playback
Select a folder on an
or recording, as this may cause irreparable damage to
+/– (select folder)
.
MP3 disc
the tape and the cassette holder.
Select a track or file
/ (go back/go forward)
To
(or turn the MULTI JOG dial on
the unit)
.
Pause playback
Find a point in a
Hold down / (rewind/fast
track or file
forward)
during playback,
and release the button at the
Stop playback
desired point.
Rewind or fast
Select Repeat Play
REPEAT
repeatedly until
forward
"REP" or "REP1" appears.
Select Relay
Select a disc
DISC SKIP (or DISC 1 – 3 on
Play*
the unit)
in stop mode.
* After the playback of the front side of deck A, deck B plays the
Switch to CD
front side, and then stops.
DISC 1 – 3
on the unit
function from other
(Automatic Source Selection).
function
Changing the display
Exchange other
EX-CHANGE
on the unit.
discs while playing
To
To change the play mode
Change the
Press PLAY MODE
repeatedly while the player is
illumination
stopped. You can select normal play ("ALL DISCS"
pattern around the
for all discs or "1 DISC" for a disc or "
*" for all
VOLUME control
on
MP3 files in the folder on the disc), shuffle play ("ALL
DISCS SHUF" or "1 DISC SHUF" or "
SHUF*"), or
Change
program play ("PGM").
information on the
* When playing a CD-DA disc,
(SHUF) Play performs the same
display*
operation as 1 DISC (SHUF) Play.
Change Display
Notes on Repeat Play
mode (See below.)
• All tracks or files on a disc are played repeatedly up to five times.
.
• You cannot select "REP" and "ALL DISCS SHUF" at the same
* For example, you can view CD/MP3 disc information, such as the
time.
track or file number or folder name during normal play, or the total
• "REP1" indicates that a single track or file is repeated until you stop
playing time while the player is stopped.
it.
Notes on playing MP3 discs
• Do not save other types of files or unnecessary folders on a disc that
has MP3 files.
• Folders that have no MP3 files are skipped.
• MP3 files are played back in the order that they are recorded onto
the disc.
• The system can only play MP3 files that have a file extension of
".MP3."
• If there are files on the disc that have the ".MP3" file extension,
but that are not MP3 files, the unit may produce noise or may
malfunction.
The system offers the following display modes.
Display mode
When the system is off
1)
,
Demonstration
The clock display is replaced by
lighting and flashing of the display
window.
Clock
The clock is displayed.
Power Saving
The display is turned off to conserve
Mode
power. The timer and clock continue
2)
to operate.
1)
The STANDBY indicator
on the unit lights up when the system
is off.
2)
When the system is in Power Saving Mode, the following functions
are unavailable:
– setting the clock.
– changing the AM tuning interval (except for Saudi Arabian
model).
– turning on the system by pressing the function buttons (for
example, CD ).
– changing the CD power manage function.
repeatedly.
– resetting the system to factory settings.
Notes on the display information
• The following are not displayed;
repeatedly until "AUTO"
– total playing time for a CD-DA disc depending on the play mode.
– total playing time for an MP3 disc.
– remaining playing time for an MP3 file.
• The following are not displayed correctly;
– elapsed playing time of an MP3 file encoded using a VBR
(variable bit rate).
– folder and file names that do not follow either the ISO9660 Level
1, Level 2 or Joliet in the expansion format.
• The following are displayed;
– ID3 tag information for MP3 files when ID3 version 1 and version
2 tags are used.
– up to 30 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (˝ $ % ' ( ) * , – . / < = >
@ [ \ ] _ ` { | } ! ? ^).
Using optional audio
components
repeatedly until
To connect an optional headphones
Connect headphones to the PHONES jack
on the
unit.
To connect an optional component
Connect additional audio component to the AUDIO
on the remote repeatedly until
IN jack
on the unit using an audio analog cord (not
supplied). Turn down the volume on the system, and then
select the AUDIO IN function.
repeatedly.
on the unit, and insert the TYPE
on the unit again to
Press
(pause) on the remote (or
(play/pause) on the unit)
. To
resume play, press the button again.
(stop)
.
/ (rewind/fast forward)
.
PLAY MODE
repeatedly until
"RELAY" appears.
Press
ILLUMINATION
on the unit
repeatedly.
DISPLAY
repeatedly when the
system is turned on.
DISPLAY
repeatedly when the
system is turned off.