Sony R-D-S EON MHC-2900 Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереосистема Sony R-D-S EON MHC-2900. Sony R-D-S EON MHC-2900 35 страниц.

Печатать страницу

Chapter 3:

the

stlelle.

Listening to the Radio

Presetting Radio Stations

Playing Preset Radio Stations

RDS Receiving

Chapter 3 : the Radio

aaa

eee

Listening to the

Radio

When you want to play a radio

programme, you can have the tuner

automatically scan the radio frequencies

and tune in the stations with clear signals.

This feature saves you time in searching for

stations with clear signals. However,

stations with weak signals may be skipped

by automatic tuning. Manually tune in the

ones skipped by automatic tuning.

1 Press TUNER/BAND repeatedly until

the band you want appears in the

display.

As you press TUNER/BAND, the band

changes as follows:

FM —

—

(en |

63 160 400 TK 28k Boe tek (HH)

2 Press TUNING MODE so that "AUTO"

and "TUNING" appear in the display.

3 Press TUNER/TIMER (+/-).

The tuner starts scanning radio

frequencies automatically, and stops

when it finds a clear station. "TUNED"

appears in the display .

"STEREO" also appears if the FM

station tuned is broadcast in stereo.

~*>

Av.

aq TUNED STEREO pe

o~ry~<™

SS 0 WO tk 25k Gm Tek Oe

4 i you don't want to listen to the station

selected, press TUNER/TIMER (+/-) to

restart the scan.

When the desired station is not

tuned in

Automatic tuning may skip the station with

weak signal. Tune in the station manually.

1 Press TUNING MODE so that only

TUNING is lit.

2 Press TUNER/TIMER (+/-) repeatedly

until the desired station is tuned in.

To improve AM broadcast reception

Reorient the supplied AM loop aerial for

AM (MW and LW.)

MW/LW

When an FM programme is not clear to

receive

Press STEREO/MONO so that "MONO"

appears in the display. There will be no

stereo effect, but the reception will

improve. Press STEREO/MONO again to

restore the'stereo effect.

One Touch Play feature

Press TUNER/BAND when the power is

off.

You will be able to start listening to the last

received station without pressing any other

buttons.

Changing the FM

Reception Mode (for the

C.1.S. model)

When you want to receive an FM broadcast

in PILOT TONE mode, change the setting

as follows:

1 Select FM band (65~74 MHz) with the

TUNER/BAND

button.

2 Press POWER to turn off the power.

3 While pressing the TUNER/TIMER (-),

press POWER to turn it on.

To reset to POLAR mode

Repeat this same procedure.

Important

Stored stations will be erased from the

memory when you change the FM

reception mode.