Sony SRS-X9 Руководство по работе с сетью - Страница 21

Просмотреть онлайн или скачать pdf Руководство по работе с сетью для Стереосистема Sony SRS-X9. Sony SRS-X9 24 страницы. Wireless lan antenna
Также для Sony SRS-X9: Руководство пользователя (28 страниц), Справочное руководство (2 страниц), Краткое руководство по эксплуатации (2 страниц)

How to check Wi-Fi signal strength

(reception sensitivity)

ˎWhile the unit is connected to Wi-Fi (the

LINK indicator lights up in green), tap and

hold the NETWORK button until you hear a

beep.

Signal

Number of flashing indicators

strength

Function buttons on the top panel of the unit

start to flash. The number of flashing indicators

shows the strength of the signal. Flashing stops

when any button is tapped.

To receive a stronger signal, try the following:

ˋ Change the direction of the wireless LAN

antenna.

ˋ Turn off other wireless devices.

How to use the BLUETOOTH/Network

standby function

If the BLUETOOTH/Network standby function is

on, the unit turns on automatically by operating

a BLUETOOTH device or network device, even if

the unit is turned off. The unit will start up more

quickly than usual.

ˎMake sure the unit is turned on. Tap and

hold the / (on/standby) button until it

lights up in orange.

The unit turns off and enters the BLUETOOTH/

Network standby mode.

If you operate a BLUETOOTH device or network

device, the unit turns on automatically and

connection starts.

How to initialize the unit

Initialize the unit if these measures do not

resolve the problem or if the settings fail.

ˎMake sure the unit is turned on. Tap and

hold both the VOL (volume) – button and

/ (on/standby) button at the same time

for more than 5 seconds.

The unit will turn off. Settings will return to their

factory defaults, and all BLUETOOTH pairing

information and network settings will be reset.