Sony STR-DA5000ES - Fm Stereo/fm-am Receiver Техническое обоснование - Страница 6

Просмотреть онлайн или скачать pdf Техническое обоснование для Стереосистема Sony STR-DA5000ES - Fm Stereo/fm-am Receiver. Sony STR-DA5000ES - Fm Stereo/fm-am Receiver 33 страницы. Limited warranty (es products)
Также для Sony STR-DA5000ES - Fm Stereo/fm-am Receiver: Руководство по простой настройке (2 страниц), Техническое обоснование (38 страниц), Ограниченная гарантия (1 страниц)

Block diagram of the S-Master Pro amplifier.

Sony generates a 1-bit pulse stream to switch a pair of FET power output

transistors on and off. The resulting output has more than enough wattage to

drive a loudspeaker.

The output transistors act like an electronic on/off switch for the power

supply voltage. The Low Pass Filter (LPF) converts the amplified

pulses to a smooth, continuous analog waveform.

The S-Master 1-bit pulse stream has much in common with the Direct

Stream Digital signal that Sony developed for Super Audio CD. If you look

carefully at the pulses, you'll see that where the audio waveform is positive, the

pulses are mostly 1. Where the audio waveform is negative, the pulses are

mostly 0. In this way, a 1-bit pulse stream can represent the audio signal. As

with a DSD signal, a Low Pass Filter (LPF) is all you need to recover the original

audio signal.

In the diagram above, (A) represents the output power pulse stream.

This combines two components, the original audio signal (B) and a

noise component (C). The audio signal (B) looks smooth and

continuous because the frequencies are low. The noise component (C)

looks abrupt and spiky because the frequencies are high. The Low

Pass Filter (LPF) effectively separates out the audio signal, for

extremely accurate music reproduction.

ES Receivers V3.0

Page 6