Sony STR-DA80ES - Fm Stereo / Fm-am Receiver Руководство по эксплуатации - Страница 14
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереосистема Sony STR-DA80ES - Fm Stereo / Fm-am Receiver. Sony STR-DA80ES - Fm Stereo / Fm-am Receiver 40 страниц. Limited warranty (es products)
Также для Sony STR-DA80ES - Fm Stereo / Fm-am Receiver: Руководство по эксплуатации (39 страниц), Техническое обоснование (38 страниц), Ограниченная гарантия (1 страниц)
Печатать страницу
Receiver Operations
To
Mute the sound Z
Reinforce the bass
Adjust the balance of
front speakers
z
When you listen with headphones
Connect the headphones to the PHONES jack and set
SPEAKERS to OFF.
z
When you want to enjoy high quality sound
Press DIRECT PASS to bypass the tone controls, bass
reinforcement, and surrround effects.
The DIRECT PASS button lights up.
z
You can adjust the brightness of the display
1 Press SET UP repeatedly to select OTHER SETUP.
2 Use the digital processing control buttons ( V / v ) to
select DIMMER.
3 Use the digital processing control buttons ( B / b ) to
adjust the brightness.
Watching TV/video programs
To watch
TV programs
Videos, laser discs or
DVD
z
When you watch TV or video programs
We recommend you play audio portion through the
receiver instead of your TV's speakers. This lets you
take advantage of the receiver's surround sound effects,
like Dolby Surround, and lets you use the receiver's
remote to control the audio.
Turn off the speakers on your TV before you start so
you can enjoy the surround sound from your receiver.
14
Do this
Press MUTING on the remote. Press
again to restore the sound.
Press BASS BOOST to light up the
button
Turn BALANCE left or right
Do this
Turn on both the TV and the receiver
and rotate FUNCTION repeatedly
until the TV/DBS indicator lights up
1 Rotate FUNCTION to select the
component (for example, VIDEO 1).
2 Turn on the TV and set the TV's
video input to match your video
component.
3 Turn on the component (VCR, LD/
DVD player), and start playback.
Using the remote Z
The remote lets you operate the receiver and the Sony
components that are connected to it.
SLEEP
LEARN
SYSTEM CONTROL / FUNCTION
VIDEO 1
VIDEO 2
VIDEO 3
(AUTO CATEGORIZE SYSTEM)
TAPE
DAT/MD
CD
TV
TV CONTROL
CONTROL
1
2
ON
ON
4
5
7
8
BACK
GROUND
SHIFT
0
>
10
–
+
SUB CH
POSITION
0
)
=
— RMS —
DIRECTION
CLEAR
9
(
p
— SOUND FIELD —
ON/OFF
GENRE
MODE
EQ/
TONE
BAND
SLOPE
DIGTAL
DIRECT
PROCESSING
CONTROL
DPC
MODE
PROGRAMMABLE
1
Press one of the SYSTEM CONTROL/
FUNCTION buttons to select the component you
want to use.
The receiver and the selected component turn on.
The SYSTEM CONTROL/FUNCTION buttons on
the remote are factory-set as follows:
To watch or listen to
Video tapes
Laser discs or Digital
Video Discs (DVD)
TV programs
Audio tapes
Digital Audio Tapes
(DAT) or MiniDiscs (MD)
Compact Discs (CD)
Radio programs
Records
*
Sony VCRs are operated with a VTR 1, 2, or 3 setting
that corresponds to Beta, 8mm, and VHS,
respectively.
Note
Pressing a SYSTEM CONTROL/FUNCTION button
will activate the component indicated for that button
(i.e., the component connected to the respective
connector). If, however, the connected component is
different from the one indicated for the button, the
component will not be activated when the button is
pressed only once.
For example, to watch Sony LD player connected to the
VIDEO 2 jacks (as shown on page 10):
Press VIDEO 2 to switch the function, then press LD to
set the remote control to operate the LD player.
If you want to change the factory setting of a
button
See page 28.
SYSTEM OFF
VISUAL
POWER
SYSTEM OFF
LD
TV
SYSTEM
TUNER
PHONO
CONTROL/
5.1
INPUT
3
FUNCTION
TV/VIDEO
6
D.TUNING
DISC
9
+
CH/
ENTER
PRESET
–
RMS/START
ANT
SWAP
TV/VTR
+
D. SKIP
P IN P
JUMP
P
r
TEST
TONE
— LEVEL —
+
+
REAR
CENTER
–
–
MASTER
BASS
VOL
BOOST
MUTING
Press
*
VIDEO 1 (VTR 3
),
*
VIDEO 2 (VTR 1
) or
*
VIDEO 3 (VTR 2
)
LD
TV
TAPE
DAT/MD
CD
TUNER
PHONO