Cisco ASR 9000 Series Руководство - Страница 11

Просмотреть онлайн или скачать pdf Руководство для Сетевое оборудование Cisco ASR 9000 Series. Cisco ASR 9000 Series 44 страницы. Line card
Также для Cisco ASR 9000 Series: Настройка параметров сети (26 страниц), Руководство по конфигурации (46 страниц), Руководство по конфигурации (50 страниц), Руководство (24 страниц), Настройка (46 страниц), Краткое справочное руководство (7 страниц)

Replacing Cisco ASR 9000 Series Router Components

Note

Due to air leakage, the chassis should not be operated with any of the fan trays completely missing. Replace

any missing fan tray within five minutes. Any fan tray replacement should be performed when the chassis is

back to room temperature.

Note

If the accessory grill has been installed on the front of the Cisco ASR 9010 Router, you must remove it before

you can remove the lower fan tray. You can remove the accessory grill by simply pulling on the grill until it

comes loose. See

information about the accessory grill.

Note

If the fan tray cover has been installed on the front of the Cisco ASR 9922 Router or Cisco ASR 9912 Router,

you must remove it before you can remove the fan tray. Remove the fan tray cover by simply pulling on the

cover until it comes loose.

To remove a fan tray from the chassis (see

Procedure

Step 1

Use the 6-inch long number 2 Phillips screwdriver to loosen the captive screw(s) that secure the fan tray.

Step 2

Use the handle on the fan tray front panel to pull the fan tray halfway out of the module bay.

Step 3

Slide out the fan tray completely from the chassis while supporting it with your other hand.

Caution

Installing a Fan Tray

Note

If you are upgrading a fan tray, follow these guidelines:

• Remove and install fan trays one at a time.

• Perform FPD upgrade on the fan tray. Refer to the "Upgrading Field-Programmable Devices" chapter

To install a fan tray into the chassis:

Installing Base Chassis Accessories on the Cisco ASR 9010

Use two hands when handling the fan tray. Each Cisco ASR 9010 Router version 1 fan tray weighs

about 16 pounds (7.27 kg). Each Cisco ASR 9910 Router version 1 fan tray weighs about 26.55

pounds (12.04 kg). Each Cisco ASR 9906 Router fan tray weighs about 8.0 pounds (3.63 kg). Each

Cisco ASR 9922 Router fan tray or Cisco ASR 9010 Router version 2 fan tray weighs about 18

pounds (8.18 kg).

in the System Management Configuration Guide for Cisco ASR 9000 Series Routers.

Figure

4, or

Replacing Cisco ASR 9000 Series Router Components

Installing a Fan Tray

Router, and

Figure 2

for

Figure

1):