Cisco ASR 9906 Руководство - Страница 43
Просмотреть онлайн или скачать pdf Руководство для Сетевое оборудование Cisco ASR 9906. Cisco ASR 9906 44 страницы. Replacing cisco asr 9000 series router components
Печатать страницу- 1. Field Replaceable Units
- 2. Online Insertion and Removal
- 3. Powering off the Router
- 4. Replacing the Chassis Air Filter
- 5. Required Tools and Equipment
- 6. Removing a Fan Tray
- 7. Installing a Fan Tray
- 8. Disconnecting AC Power
- 9. Reconnecting AC Power
- 10. Disconnecting DC Power
- 11. Reconnecting DC Power
Replacing Cisco ASR 9000 Series Router Components
Example:
Router# show platform
Node
--------------------------------------------------------------------------------
0/RSP0/CPU0
0/RSP1/CPU0
0/FT0
0/FT1
0/1/CPU0
0/FC0
0/FC1
0/FC2
0/FC3
0/FC4
0/PT0
0/PT1
Use the admin show alarm and show pfm location all commands to verify no additonal alarms are raised
after replacing all the FCs.
Removing a Chassis from the Equipment Rack
Follow these steps to remove the chassis and its components from the equipment rack:
Procedure
Step 1
Power off the router (see
Caution
Step 2
Power off the circuit breakers to the power supplies.
Step 3
Disconnect the power from the power modules on the rear of the chassis.
Step 4
Disconnect the supplemental bonding and grounding connection from the chassis (see
and Grounding Connections
Step 5
Remove the fan tray (see
Step 6
Disconnect RSP/RP cables connected to the console port, auxiliary port, or either of the management Ethernet
ports. Be sure to label each of the RSP/RP cables before you disconnect the cables.
Step 7
Disconnect any cables connected to the external alarm port on the alarm display.
Label each of the alarm display cables before you disconnect the cables.
Step 8
Disconnect the line card interface cables.
Step 9
Remove the RSP cards, RP cards, FCs, and LCs from the chassis (see
the Chassis, on page
Step 10
Remove the chassis air filter (see
Type
A9K-RSP5-TR(Standby)
A9K-RSP5-TR(Active)
ASR-9910-FAN
ASR-9910-FAN
A9K-8X100GE-TR
A99-SFC3-S
A99-SFC3-S
A99-SFC3-S
A99-SFC3-S
A99-SFC3-S
A9K-AC-PEM-V3
A9K-AC-PEM-V3
Powering Off the Router, on page
You must use two people to remove the chassis from the equipment rack safely. An empty chassis
can weigh up to approximately 300 pounds (136 kg).
).
Removing and Replacing the Fan Trays, on page
25).
Replacing the Chassis Air Filter, on page
Removing a Chassis from the Equipment Rack
State
Config state
IOS XR RUN
IOS XR RUN
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
IOS XR RUN
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
3).
10).
Removing and Replacing Cards from
4).
Replacing Cisco ASR 9000 Series Router Components
NSHUT
Supplemental Bonding
43