Argo Vanguard Series Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Внедорожник Argo Vanguard Series. Argo Vanguard Series 12 страниц. Fuel system
Также для Argo Vanguard Series: Руководство по эксплуатации (16 страниц)
Печатать страницу
Fuel System
15. Perform the servicing procedure, Inspecting the Fuel Tank
Installing the Fuel Tank (6x6 Vanguards prior to S7304)
1.
Install any missing or torn pieces of cushioning to the fuel tank. There are 8 locations
that make contact with the fuel cage.
2.
Assemble the cage and tank between the seat supports, at the same time reconnect-
ing the filler hose to the tank. As the fuel tank is completely installed, slide the fuel
neck intake assembly into the gas cap hole ensuring that the venting tube is vertical
to the vehicle body.
3.
Tighten the gear clamp at the tank.
4.
Reattach the fuel line to the pickup tube.
5.
Fasten the fuel tank cage and seat to the seat support brackets. Tighten the bolts with
a socket and extension.
Insert the bolts squarely into the seat cushion and do not overtighten. Incorrectly
positioned and tightened bolts will strip or dislodge the thread inserts in the seat
cushions, resulting in a costly repair.
6.
Reinstall the backrest.
7.
Reinstall the front floor pan
Fuel Filter
All models of the ARGO are equipped with an in-line fuel filter (replacement fuel filter is
ARGO Part No. 125-64). On Conquest models the fuel filter is located in the fuel hose,
next to the fuel tank. On all other Argo models the fuel filter is located at the engine.
Replace the fuel filter after every 250 hours of operation or once a year. To replace the
filter, loosen the gear clamps with a standard screw driver and pull the rubber fuel lines
off of the filter. Install the new filter with the flow arrow pointing toward the engine.
Tighten the clamps securely. Start the engine and check for fuel leaks.
Ontario Drive & Gear Limited
PH.(519)- 662-2840 FAX (519)- 662-2421
Argo Service Manual
FS-8
www.odg.com