Cisco Catalyst 8300 Series Руководство по установке оборудования - Страница 20
Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Сетевое оборудование Cisco Catalyst 8300 Series. Cisco Catalyst 8300 Series 46 страниц. Edge ucpe
Печатать страницуInstalling the Cisco Catalyst 8300 Series Edge uCPE
1
2
Rack-Mounting the Chassis
The Catalyst 8300 uCPE can be installed in 19-inch (48.26-cm) or 23-inch (58.42-cm) racks. The mounting
ears for the device are designed for #12 screws for securing to the rack.
The device can be rack-mounted in the following ways:
• Front (I/O-face) mounting—Brackets attached at the front of the chassis with the front panel (I/O) facing
forward
• Back (PSU-side) mounting—Brackets attached at the back of the chassis with the back (PSU-side) panel
facing forward
Attaching Brackets to the Chassis
Attach one mounting bracket to each side of the device as shown in following figures. Four screws are required
to attach each bracket to the device. Screws are provided with the mounting kit to attach the screws to the
device.
Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide
16
Install the Cisco Catalyst 8300 Series Edge uCPE
Rubber feet
Circular markings for placing the feet