Cisco Catalyst 8300 Series Руководство по установке оборудования - Страница 35

Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Сетевое оборудование Cisco Catalyst 8300 Series. Cisco Catalyst 8300 Series 46 страниц. Edge ucpe

Печатать страницу

Install and Upgrade Field Replaceable Units

4. Orient the DIMM so that the polarization notch lines up with the polarization key on the connector.

5. Insert the DIMM into the connector.

6. Replace the chassis cover.

Removing a DIMM

These are the steps to remove a DIMM:

1. Remove the chassis cover.

2. Locate the DIMM module on the device. Refer to the

DIMM module.

3. Pull the latches away from the DIMM at both ends to lift the DIMM slightly. Pull the DIMM out of the

socket.

4. Place the DIMM in an antistatic bag to protect it from ESD damage.

5. Replace the chassis cover.

Installing the M.2 Storage Module

The M.2 storage modules come with different storage capacities and can be replaced through the front panel

if required.

Chassis-Internal

Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide

Removing a DIMM

section to identify and locate the