Digitone ProSeries II Call Blocker Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для телефонов Digitone ProSeries II Call Blocker. Digitone ProSeries II Call Blocker 17 страниц. Automatically blocks and routes screened calls using caller id with back lighted display
Печатать страницу
Red LED
Code 28
- If you don't want to see the LED flashing at all, you can disable it.
Press and hold the Program Button for 3 seconds until you see "Program Mode", then
"Pick Up Phone", when the prompt for "Enter Code" displays, enter 29. Default is 28.
Operating Modes
- You can switch between the operating modes using the
programming button and by entering one of the mode numbers. The DPCB can toggle
between the modes Standard, Business or Select using one of the settings below.
Note: After Hours Mode runs together with Standard, Business or Select Mode when
either mode is enabled. Mode settings are displayed only when entering Programming
Mode.
Standard (default) Mode Code 30 - When calls come in, all phone numbers that are
Invited will ring phones throughout your home/office like normal and to the TEL phone
port on the back of the DPCB, except for Anonymous, Out Of Area, Private and
Unknown callers showing no phone number. These calls will be answered by the
DPCB for processing and by default be hung-up. Blocked callers will be immediately
answered and after eight seconds, get hung-up on. To enable this (default) Mode,
press and hold the Program Button for 3 seconds until you see "Program Mode", then
"Pick Up Phone", when the prompt for "Enter Code" displays enter 30, display shows
function.
Business Mode Code 31 - If you are running a business and want to hear from
Anonymous, Out Of Area, Private and Unknown callers as well as any other type of call,
you can enable Business Mode Code 31 to allow calls through to the TEL phone port
except those you want to block. This mode also works with your phone company's voice
mail but also blocks those phone numbers you have entered into the Blocked Callers
List. Blocked callers will be immediately answered and after eight seconds get hung-
up on. To enable this Mode, press and hold the Program Button for 3 seconds until you
see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays
enter 31, display shows function.
Select Mode Code 33 - In Select Mode, you can enter only the callers you want to ring
through to your phones connected to the TEL Port while all others can ring your voice
mail service or a separate answer machine in parallel with the DPCB. Note: You must
enter numbers into the Invited or VIP Lists to receive calls. This mode allows
the LINE to ring for all callers with valid phone numbers and is subject to OPX Code
blocking.
Also with After Hours Mode enabled, only VIP callers can ring through.
Blocked callers will be immediately answered and after eight seconds, get hung-up
on. To enable this mode, press and hold the Program Button for 3 seconds until you
see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays
enter 33, display shows function.
Wildcarding
(#)
When using the block or invite commands, you can use the # key to represent all
numbers in a phone number's column. In the phone number ex. 894 555 1212, if you
want to block or invite all numbers (0-9) in a single column you would insert the # key
in that column. Examples: To block all numbers (0-9) in the last column, you would use
40 894 555 121# *. To invite all numbers in the exchange 679 and area code 894, use
50 894 679 *. To block all numbers in the exchange 555 use: 20 555 *.
6