ACU-RITE SENC 150 Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Медиаконвертер ACU-RITE SENC 150. ACU-RITE SENC 150 6 страниц. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Также для ACU-RITE SENC 150: Руководство по установке (8 страниц), Справочное руководство (20 страниц), Руководство по установке (4 страниц), Руководство по эксплуатации (12 страниц)

Печатать страницу
SENC 150
Encoder orientation ...
Center support
Encoder Assembly
Reading head, sides 1
& 2 face outward
Reading head
bracket
•
These instructions will guide you through installing
the encoder as shown in this view.
Cable exit ...
Plug
Cover plate
T-10 Torx screw (2)
•
Determine the cable exit direction before installing
the encoder.
•
To change the cable exit direction; remove the cover
plate and rotate the cable 180°.
Encoder Installation ...
•
Remove the table stop from the front of the saddle.
•
Attach the reading head bracket using the same
fasteners.
P.N. 385033-121 Ed C 2/06
Table
Saddle
Vinyl cable grommet
Armor cable hex crimp
Use the existing 3/8-16 SHCS
used to fasten the stop
Reading head bracket
Installation Manual 385033-000
Encoder Installation Manual For: Bridgeport Series I
Vertical Knee Mill / Longitudinal X Axis front table mount
*M6 Flat washer
(2) .017" thick
•
Replace exiting T-Nuts from the front of the table
with the T-Nuts supplied in the bracket kit.
•
Fasten the encoder to the table, but do not tighten
fully.
•
With the table at its center of travel, position the
encoder so that the bracket mounting holes and the
reading head mounting holes are in the same
proximity.
Align the top of the encoder
with the table top surface or
axis travel to within .010"
Saddle
•
Align the top of the encoder to within .010" TIR.
•
Secure encoder in place maintaining alignment.
Center support installation ...
**Center support
•
Insert the center support to the top of the scale case
above the center location tag.
•
Ensure that the center support interlocks with the
scale case.
2
1/4-20 x 1-1/8" BHCS (2)
Table
Acu-Rite Companies Inc.
T-Nut (2)