Cisco Firepower 4100 Series Руководство по эксплуатации

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сетевое оборудование Cisco Firepower 4100 Series. Cisco Firepower 4100 Series 17 страниц. Rack-mount and ground the chassis
Также для Cisco Firepower 4100 Series: Руководство (8 страниц), Руководство по техническому обслуживанию и модернизации (20 страниц), Руководство (36 страниц), Руководство (8 страниц), Руководство (42 страниц), Руководство (38 страниц)

Печатать страницу
Cisco Firepower 4100 Series Руководство по эксплуатации

Installation and Configuration

This document is written assuming that you have already determined the 802.11 topology as described
in the Appliance Mode sections in the Product Guide. Because the Radio Resource Management (RRM)
feature automatically detects and configures the access points as they appear on the network, it is not
necessary to have any access points on the network to install and configure controllers.
The controller is a slim 9 x 5.5 x 1.5 in. (22.9 x 14.0 x 3.8 cm) chassis that can be rack, desktop, or shelf
mounted. As shown in the following figures, the controller is shipped with 19 in. (48.26 cm) EIA
rack-mount ears and four rubber mounting feet.
The following figure shows the controller, which has two front-panel 1000BASE-SX connectors.
The 1000BASE-SX Network Adapters provides 100/1000 Mbps wired connections to a network through
Note
850nM (SX) fiber-optic links using LC physical connectors.
Figure 1
Cisco 4100 Series Wireless LAN Controller
Cisco 4100 Series Wireless LAN Controllers - Installation and Configuration Guide
78-17155-01
1