Cisco Firepower 4110 Руководство - Страница 14

Просмотреть онлайн или скачать pdf Руководство для Сетевое оборудование Cisco Firepower 4110. Cisco Firepower 4110 42 страницы. Rack-mount and ground the chassis
Также для Cisco Firepower 4110: Руководство по техническому обслуживанию и модернизации (20 страниц), Руководство (36 страниц), Руководство (26 страниц), Руководство (8 страниц), Начало работы (42 страниц)

100-Gb Network Module (Two Ports, Single Wide)

Note

Figure 9: FPR4K-NM-4X40G

100-Gb Network Module (Two Ports, Single Wide)

The following figure shows the front panel of the 100-Gb network module (FPR4K-NM-2X100G). The

FPR4K-NM-2X100G is a single-wide module that supports hot swapping. The two ports are numbered left

to right. The FPR4K-NM-2X100G is first supported in FTD 7.2 and ASA 9.18.

Note

Overview

The FPR4K-NM-4X40G is NEBS-compliant.

Captive screw/handle

Ethernet X/1

Ethernet X/3

Make sure you have the correct firmware package and software version installed to support this network

module. For instructions on how to verify your firmware package version and to upgrade the firmware if

necessary, see the

Cisco Firepower 4100/9300 FXOS Firmware Upgrade

FXOS Compatibility

for the software compatibility matrix.

Network activity LEDs

• Off—No connection or port is not in use.

• Amber—No link or network failure.

• Green—Link up.

• Green, flashing—Network activity.

• 40Gb—Only the leftmost LED indicates the

port status.

• 4x10Gb—Each of the port LEDS indicates

the status of respective 10-Gb channel.

Ethernet X/2

Ethernet X/4

Guide. See

Overview

Cisco Firepower 4100/9300