Cisco Firepower 4125 Руководство - Страница 5
Просмотреть онлайн или скачать pdf Руководство для Сетевое оборудование Cisco Firepower 4125. Cisco Firepower 4125 8 страниц. Rack-mount the chassis
Также для Cisco Firepower 4125: Руководство (38 страниц), Начало работы (42 страниц)
Печатать страницу
Rack-Mount the Chassis
The slide rail front end wraps around the outside of the rack post and the mounting pegs enter the rack-post holes
from the outside front.
Note
The rack post must be between the mounting pegs and the open securing plate.
b) Push the mounting pegs into the rack-post holes from the outside front.
c) Press the securing plate release button marked PUSH. The spring-loaded securing plate closes to lock the pegs in
place.
d) Adjust the slide-rail length, and then push the rear mounting pegs into the corresponding rear rack-post holes. The
slide rail must be level front-to-rear.
The rear mounting pegs enter the rear rack-post holes from the inside of the rack post.
e) Attach the second slide-rail assembly to the opposite side of the rack. Make sure that the two slide-rail assemblies
are at the same height with each other and are level front-to-back.
f) Pull the inner slide rails on each assembly out toward the rack front until they hit the internal stops and lock in place.
Step 5
Insert the chassis into the slide rails.
a) Align the rear of the inner rails that are attached to the chassis sides with the front ends of the empty slide rails on
the rack.
b) Push the inner rails into the slide rails on the rack until they stop at the internal stops.
c) Slide the release clip toward the rear on both inner rails, and then continue pushing the chassis into the rack until the
mounting brackets meet the front of the slide rail.
Figure 4: Inner Rail Release Clip
1
Inner rail release clip
3
Outer rail attached to rack post
Step 6
Use the captive screws on the front of the mounting brackets to fully secure the chassis to the rack.
2
Inner rail attached to chassis
Rack-Mount the Chassis
Rack-Mount the Chassis
5