Cisco Firepower 4150 Руководство - Страница 14

Просмотреть онлайн или скачать pdf Руководство для Сетевое оборудование Cisco Firepower 4150. Cisco Firepower 4150 36 страниц. Rack-mount and ground the chassis
Также для Cisco Firepower 4150: Руководство по техническому обслуживанию и модернизации (20 страниц), Руководство (26 страниц), Руководство (8 страниц), Руководство (42 страниц), Начало работы (42 страниц)

40-Gb Network Module with Hardware Bypass

The following figure shows the front panel of the 40-Gb hardware bypass network module

(FPR4K-NM-2X40G-F). The FPR4K-NM-2X40G-F is a single-wide module that does not support hot

swapping. The two ports are numbered left to right. Pair the two ports to create a hardware bypass paired set.

Note

Make sure you have the correct firmware package and software version installed to support this network

module. For instructions on how to verify your firmware package version and to upgrade the firmware if

necessary, see the

FXOS Compatibility

Figure 11: FPR4K-NM-2X40G-F

Overview

Bypass LEDs B1 through B4

• Green—In standby mode.

• Amber, flashing—Port is in hardware bypass

mode, failure event.

• Amber—Port is in hardware bypass mode,

forced.

Cisco Firepower 4100/9300 FXOS Firmware Upgrade

for the software compatibility matrix.

Captive screw/handle

Guide. See

Cisco Firepower 4100/9300

Ethernet X/1

Ports 1 and 2 are paired together to form a

hardware bypass pair.

Overview