Cisco GS7000 Руководство по техническому обслуживанию - Страница 11

Просмотреть онлайн или скачать pdf Руководство по техническому обслуживанию для Сетевое оборудование Cisco GS7000. Cisco GS7000 15 страниц. Gainmaker node forward local injection module
Также для Cisco GS7000: Руководство по установке (13 страниц), Устранение неполадок (4 страниц), Руководство по устранению неполадок (12 страниц)

Maintenance

Cleaning fiber-optic connectors can help prevent interconnect problems and aid system performance. When

optical connectors are disconnected or reconnected, the fiber surface can become dirty or scratched, reducing

system performance.

Inspect connectors prior to mating, clean as needed, and then remove all residues. Inspect connectors after

cleaning to confirm that they are clean and undamaged.

Recommended Equipment

• CLETOP or OPTIPOP ferrule cleaner (CLETOP Type A for SC, Type B for LC)

• Compressed air (also called "canned air")

• Lint-free wipes moistened with optical-grade (99%) isopropyl alcohol

• Bulkhead swabs for LC or SC type connectors (choose appropriate type)

• Optical connector scope

• Do not connect or disconnect optical connectors with optical power present.

• Always use compressed air before cleaning the fiber-optic connectors and when cleaning connector end

• Always install or leave end caps on connectors when they are not in use.

• If you have any degraded signal problems, clean the fiber-optic connector.

• Advance a clean portion of the ferrule cleaner reel for each cleaning.

• Turn off optical power before making or breaking optical connections to avoid microscopic damage to

Warning

• Avoid personal injury! Use of controls, adjustments, or performance of procedures other than those

• Avoid personal injury! The laser light source on this equipment emits invisible laser radiation. Avoid

• Avoid personal injury! Viewing the laser output with optical instruments (such as eye loupes, magnifiers,

• Connect or disconnect fiber only when equipment is OFF or in Service mode.

• Do not apply power to this equipment if the fiber is unmated or unterminated.

caps.

fiber mating surfaces.

specified herein may result in hazardous radiation exposure.

direct exposure to the laser light source.

or microscopes) may pose an eye hazard.

Recommended Equipment

Maintenance