Cisco PIX 501 Краткое руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сетевое оборудование Cisco PIX 501. Cisco PIX 501 21 страница. Data sheet
Также для Cisco PIX 501: Краткое руководство по эксплуатации (20 страниц), Информационный лист (8 страниц), Краткое руководство по эксплуатации (20 страниц), Краткое руководство по эксплуатации (18 страниц)

PDM Version 2.0 and higher releases include a Startup Wizard for initial configuration. Follow these

steps to use the Startup Wizard:

If you have not already done so, use an Ethernet cable to connect your PC to one of the four

Step 1

switched inside ports (numbered 1 through 4) on the rear panel of the PIX Firewall.

Ethernet1 interface in the PIX 501 is the internal interface connecting the

Note

PIX Firewall to the four switched inside ports with a fixed speed of 100 Mbps full

duplex. The PIX Firewall automatically negotiates the inside interface speed, and this is

not configurable.

Configure your PC to use DHCP (to receive an IP address automatically from the

Step 2

PIX Firewall) or assign a static IP address to your PC by selecting an address outside of the

192.168.1.0 network.

The inside interface of the PIX Firewall is assigned 192.168.1.1, so choose a different

Note

IP address.

Step 3

Check the LINK LED to verify that your PC has basic connectivity to the PIX Firewall on one

of the inside ports (numbered 1 through 4). When connectivity occurs, the LINK LED on the

front panel of the PIX Firewall lights up solid green.

To access the Startup Wizard, use a PC connected to one of the PIX Firewall switch ports and enter

Step 4

the URL https://192.168.1.1/startup.html into your browser.

Remember to add the "s" to "https" or the connection fails. HTTPS (HTTP over SSL)

Note

provides a secure connection between your browser and the PIX Firewall that you are

using PDM to configure or monitor.

Leave both the userword and password boxes empty. Press Enter.

Step 5

Accept the certificates and follow the instructions in the Startup Wizard. For online Help,

Step 6

click the Help button at the bottom of the Startup Wizard window.