Digitronic DIGISPEED DS1/V2 Руководство - Страница 12
Просмотреть онлайн или скачать pdf Руководство для Промышленная электротехника Digitronic DIGISPEED DS1/V2. Digitronic DIGISPEED DS1/V2 14 страниц. Digital switching-speed increaser
Печатать страницу
Digitronic
Automationsanlagen GmbH
5.1. The status LEDs
The DIGISPEED is equiped with 7 status LEDs, that light the terminal
allocation under the transparent sheet from behind. For every LED a specific
symbol was printed on the connection allocation.
Four LEDs show the actual status of the inputs. These are: Inp.1, Inp. 2, Cfg.
1 and Cfg. 2.
Two more LEDs show the actual status of the outputs. These are: Out. 1 and
Out. 2.
The last LED named Pow. displays the devices status.
6. Recovery time for the DIGISPEED-DS2
The recovery time for the DIGISPEED-DS2 is needed for the continous recharging of the condenser to
create the overload amplifier impulse, since after every initiation of such a surge impulse, the
condenser has to recharge itself first. This means, that between two consecutive overload amplifier
impulses, you have to wait for at least the time given in the table below.
Current (mA) Ü-Zeit* 1 ms Ü-Zeit* 2 ms Ü-Zeit* 5 ms Ü-Zeit* 10 ms
1000
*Ü-Zeit: Duration of the over-energizing impulse
Ausgabe: August 04
100
4 ms
200
8 ms
300
12 ms
400
16 ms
500
20 ms
600
24 ms
700
28 ms
800
32 ms
900
36 ms
40 ms
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
Digitaler Schaltbeschleuniger
DIGISPEED DS1/V2
Device starts.
Status OK.
Error output 1
Error output 2
Error output 1+2
8 ms
20 ms
16 ms
40 ms
24 ms
60 ms
32 ms
80 ms
40 ms
100 ms
48 ms
120 ms
56 ms
140 ms
64 ms
160 ms
72 ms
180 ms
80 ms
200 ms
E-mail:[email protected]
Site web : www.hvssystem.com
40 ms
80 ms
120 ms
160 ms
200 ms
240 ms
280 ms
320 ms
360 ms
400 ms
Seite: 12