Cisco SPA525G - Small Business Pro IP Phone VoIP Руководство по настройке и эксплуатации - Страница 7

________________________________________________________________

2.4. Making the Connection

Plug in the network and power connections. The phone will then perform a boot-up

sequence. During this sequence the line lights (on the top right of your phone) will

initially glow orange and then the phone with screen will display the Cisco logo

followed by 'Initializing Network'.

After your phone is successfully connected to the network and receives a basic

configuration, your phone line keys should glow green.

The phone screen will then display the standard menu for the phone. The date,

time and number of the phone are displayed on the top line of the LCD screen. At

the bottom action commands are displayed over their associated soft keys.

You should now hear a dial tone when you pick up the handset or press the

loudspeaker button. Try making a call.

If at any time you don't hear a dial tone or the line lights turn orange then unplug

the power supply to the phone and reboot your router. When the router has

successfully rebooted plug the power back into the phone.

If the line lights still fail to turn green then this may because there is a power

failure, broadband ADSL fault or connection device failure. If you are unable to

identify a fault then please contact your provider.

The 4 buttons at the top right of the phone are the line buttons. A phone can have

one or two lines associated with it and each line has two line buttons.

If your phone has one line, then two line buttons will be lit. If your phone has two

lines, four line buttons will be lit.

For each phone line this allows you to:



make a second call while a call is already in progress (putting the first call

on hold)



receive a second call while a call is already in progress (if Call Waiting is

switched on)



to switch between two different calls

Once you're connection is established open up the portal website

www.telephony-cloud.com and log in using the Username (logon ID) and

Password given in the Configuration Details sheet that came with your handset.

You can now set up the particular features and facilities you would like to use on

your phone service. Please see the Setup and User Guide.

2/14