Cisco UCS B200 M3 Руководство по обновлению - Страница 4

Просмотреть онлайн или скачать pdf Руководство по обновлению для Сетевое оборудование Cisco UCS B200 M3. Cisco UCS B200 M3 21 страница. Blade server
Также для Cisco UCS B200 M3: Руководство по установке (34 страниц), Указания по установке и обслуживанию (36 страниц), Указания по установке и обслуживанию (37 страниц), Руководство (8 страниц), Указания по установке и обслуживанию (28 страниц)

Cisco UCS Blade Server

Upgrade Scenario 1: UCSM and BIOS Earlier Than Version 2.1(3a), CPU Earlier Than Intel E5-2600 v2

This scenario assumes the following conditions:

•

In this case, use the following procedure to upgrade the server and CPUs.

Upgrade the Cisco UCS Manager software to version 2.1(3a) or later. The required server CIMC and

Step 1

BIOS are also included with the 2.1(3a) download bundle.

Use the procedures in the appropriate upgrade guide for Release 2.1 (depending on your current software

version):

Use Cisco UCS Manager 2.1(3a) to upgrade and activate the server CIMC to version 2.1(3a) or later.

Step 2

Use the procedures in the GUI or CLI

Use Cisco UCS Manager 2.1(3a) to upgrade and activate the server BIOS to version 2.1(3a) or later.

Step 3

Use the procedures in the GUI or CLI

Disassociate the server in Cisco UCS Manager.

Step 4

Power off the server.

Step 5

Replace the CPUs with the Intel E5-2600 v2 Series CPUs.

Step 6

Use the procedures in the

Reinsert the server to the chassis.

Step 7

Wait for Cisco UCS Manager to automatically discover the server.

Step 8

Note

Perform a board controller activation by using the Cisco UCS Manager CLI interface. Use the following

Step 9

sequence of commands:

Note

# scope server <chassis/server>

# scope boardcontroller

# show image

# activate firmware <boardcontroller version>.0 force

# commit-buffer