Cisco WS-X6148-FE-SFP= - Classic Interface Module Switch Информационный лист - Страница 5
Просмотреть онлайн или скачать pdf Информационный лист для Сетевое оборудование Cisco WS-X6148-FE-SFP= - Classic Interface Module Switch. Cisco WS-X6148-FE-SFP= - Classic Interface Module Switch 9 страниц. Cisco catalyst x6524: supplementary guide
Также для Cisco WS-X6148-FE-SFP= - Classic Interface Module Switch: Белая книга (18 страниц)
Печатать страницу
Fabric connection—Connect to the switch fabric using one 8-Gbps connection and the 32-Gbps shared bus
Supervisor engine—Work with Supervisor Engine 1A, Supervisor Engine 2, Supervisor 32, or Supervisor Engine 720
Distributed forwarding upgrade—Optional, field upgradeable to support distributed forwarding: DFC3 (part number WS-F6K-DFC3A or WS-
F6K-DFC3B or WS-F6K-DFC3BXL) upgrade to operate with Supervisor Engine 720, DFC (part number WS-F6K-DFC) upgrade to operate with
Supervisor Engine 2/MFSC2 and a Switch Fabric Module
Slot requirements—Can occupy any slot in any Cisco Catalyst 6500 Series chassis.
Maximum port density per chassis—up to 288 ports per Cisco Catalyst 6513 chassis, and up to 192 ports per Cisco Catalyst 6509 chassis.
Note:
No inline power support for voice is available for 100BASE-FX fiber modules.
Table 4.
CEF256 100BASE-FX Fiber Interface Module
Product
WS-X6524-100FX-MM
Figure 3.
CEF256-Based 100BASE-FX Fiber Interface Module (part number WS-X6524-100FX-MM)
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com
Ports, Interfaces, and Connectors
24-port; 100BASE-FX; MT-RJ
© 2005 Cisco Systems, Inc. All right reserved.
Maximum Distance per Cable Type
2-km full duplex, 400m half duplex;
62.5- and 125-micron multimode fiber
Page 5 of 9
Maximum Frame Size
(jumbo frame) Support
Up to 9216 bytes