Argos 3FT Josie 434/7972 Инструкция по сборке Руководство - Страница 2

Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Внутренняя отделка Argos 3FT Josie 434/7972. Argos 3FT Josie 434/7972 11 страниц. Bunk bed

Argos 3FT Josie 434/7972 Инструкция по сборке Руководство
Safety and Care Advice
Important
Please read these instructions fully before starting assembly
. Check you have all the
components and tools listed on
pages 2 and 3.
. Remove all fittings from the
plastic bags and separate them
into their groups.
. Keep children and animals
away from the work area, small
parts could choke if swallowed.
. Make sure you have enough
space to layout the parts before
starting.
. Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Care and maintenance
.
Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.
. Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
IMPORTANT, READ CAREFULLY -RETAIN FOR FUTURE REFERENCE.
ASSEMBLY:
Current legislation requires that the bunk bed must be fitted with 4 safety-rails and a ladder or platform for the
upper bunk bed. The bunk bed meets the European EN 747-2012 standards for security and durability.
MATTRESS:
This bed is designed to use a mattress size 190 cm. long and 91,0 cm. wide. The total thickness must not
exceed 16,0 cm. The mattress top must not pass the marking on the ladder.
WARNING:
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of injury
from falls. Do not use the bed if any structural part is broken or missing. Be aware that children can strangle in
items such as ropes, strings, cords, harnesses and belts attached to or hung on a bunk bed/high bed.
WARNING:
Children can become trapped between the bed and the wall. To avoid risk of serious injury the distance
between the top safety barrier and the wall shall not exceed 75 mm. or shall be more than 230 mm.
MAINTENANCE INSTRUCTIONS:
All assembly fastenings should always be tightened properly and that care should be taken that no fi ttings are
loose.
CLEANING:
LACQUERED: Wooden, lacquered and painted as well as laminated surfaces should be wiped over with a
cloth and a mild soap.
OIL: Oiled surfaces can be cleaned with soapy water, e.g. brown soap. Wipe with a clean cloth. To maintain the
natural life in the furniture which is provided by the oil treatment, we recommend an oil aftercare of the furniture
1-2 times a year. The colourless natural oil for maintenance of oil-treated furniture is available at your local
furniture store.
1
.
This product contain
natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.
. Do not stand or put weight on
the product, this could cause
damage.
. Assemble the item as close
to its final position (in the same
room) as possible.
. From time to time check
that there are no loose
screws on this unit.
. We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
. Parts of the assembly will be
easier with 2 people.
. Dispose of all packaging
carefully and responsibly.
. This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.