3Com NJ205 - IntelliJack Switch Характеристики Руководство - Страница 7
Просмотреть онлайн или скачать pdf Характеристики Руководство для Сетевой маршрутизатор 3Com NJ205 - IntelliJack Switch. 3Com NJ205 - IntelliJack Switch 14 страниц. Virtual lans and traffic prioritization
Также для 3Com NJ205 - IntelliJack Switch: Характеристики Руководство (4 страниц)
Печатать страницу
3 C O M
®
N J 2 0 5 I N T E L L I J A C K
Figure 5. Setting the outgoing and incoming tag
schemes assigns the PAN ports to one or more VLANs.
™
S W I T C H — V L A N S & T R A F F I C P R I O R I T I Z AT I O N
Setting Outgoing and Incoming Tag Schemes
Once the Port Associations have been set up, the PAN ports can be assigned to VLANs
using the appropriate VLAN ID (VID) numbers. The PAN-port VIDs can be any number
from 0 to 4095 and must match the core-switching VIDs, which are typically assigned
by the enterprise network management platform.
IMPORTANT: If any PAN port is configured with a VID that has no corresponding upstream match, the
entire switch may lose network connectivity. To reset the LAN port and recover network communications,
the NJ205 IntelliJack Switch must be connected to a hub or flat VLAN. It can then be reconfigured with the
proper VID using 3Com Central Configuration Manager.
1. Put a check the
Outgoing Tag Scheme
Note: This setting affects both VLAN and traffic priority sorting on a bridge-wide basis.
Port 1
2. Select the
tab and from the pull-down menu, select
untagged frame
.
3. Put a check in the
VLAN ID
are now configured as part of the "VLAN 1" subnet.
4. Repeat the last two steps to configure PAN ports 3 and 4 as part of the "VLAN 2"
subnet. Click
OK
to exit configuration window.
5. Put a check in the
Incoming Tag Scheme
Note: This setting affects both VLAN and priority traffic sorting on a bridge-wide basis.
6. From the pull-down menu, select
7. Click
OK
to exit configuration window.
box.
Add tag to any
box and type
1
in the
VLAN ID
box.
Frames received are unmodified
field. PAN ports 1 and 2
.
7