Cisco Firepower 1120 Руководство по установке оборудования - Страница 28

Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Сервер Cisco Firepower 1120. Cisco Firepower 1120 42 страницы. Connected grid router
Также для Cisco Firepower 1120: Руководство по установке оборудования (30 страниц), Руководство по установке (6 страниц), Краткое руководство по эксплуатации (10 страниц), Руководство (6 страниц), Руководство по установке оборудования (42 страниц), Руководство по развертыванию (8 страниц), Начало работы (42 страниц)

Rack Configuration Considerations

See

Rack-Mount the Chassis, on page 25

Consider the following when planning a rack configuration:

• If you are mounting a chassis in an open rack, make sure that the rack frame does not block the intake

• If your rack includes closing front and rear doors, the doors must have 65 percent open perforated area

• Be sure enclosed racks have adequate ventilation. Make sure that the rack is not overly congested as each

• In an enclosed rack with a ventilation fan in the top, heat generated by equipment near the bottom of the

• Baffles can help to isolate exhaust air from intake air, which also helps to draw cooling air through the

Cisco Firepower 1100 Series Hardware Installation Guide

or exhaust ports.

evenly distributed from top to bottom to permit adequate airflow.

chassis generates heat. An enclosed rack should have louvered sides and a fan to provide cooling air.

rack can be drawn upward and into the intake ports of the equipment above it in the rack. Ensure that

you provide adequate ventilation for equipment at the bottom of the rack.

chassis. The best placement of the baffles depends on the airflow patterns in the rack. Experiment with

different arrangements to position the baffles effectively.

for the procedure for rack-mounting the chassis.

Installation Preparation