Cisco SNS-3495 series Руководство по установке - Страница 13

Просмотреть онлайн или скачать pdf Руководство по установке для Сервер Cisco SNS-3495 series. Cisco SNS-3495 series 19 страниц. Sns-3400 series
Также для Cisco SNS-3495 series: Руководство по установке (36 страниц), Руководство по устранению неполадок (8 страниц)

Chapter 8

Installing the Cisco SNS 3415 and Cisco SNS 3495 Hardware Appliances

System BIOS and CIMC Firmware

This section includes information about the system BIOS 1.4.7b.0, and it includes the following sections:

•

When you upgrade the BIOS firmware, you must also upgrade the CIMC firmware to the same version

Caution

or the server will not boot. Do not power off the server until the BIOS and CIMC firmware are matching

or the server will not boot.

Cisco provides the Cisco Host Upgrade Utility to assist with simultaneously upgrading the BIOS, CIMC,

and other firmware to compatible levels.

The server uses firmware obtained from and certified by Cisco. Cisco provides release notes with each

firmware image. There are several methods for updating the firmware:

•

See the Cisco Host Upgrade Utility Quick Reference Guide for your firmware level at the documentation

roadmap link below.

Note

•

For links to the documents listed above, see the documentation roadmap at the following URL:

http://www.cisco.com/go/unifiedcomputing/c-series-doc

To change the BIOS settings for your server, follow these steps. Detailed instructions are also printed on

the BIOS screens.

Enter the BIOS setup utility by pressing the F2 key when prompted during bootup.

Step 1

Note

Updating the BIOS and CIMC Firmware, page 8-13

Accessing the System BIOS, page 8-13

Recommended method for systems running firmware level 1.2 or later: Use the Cisco Host

Upgrade Utility to simultaneously upgrade the CIMC is 1.4.7a, BIOS 1.4.7b.0, LOM, LSI storage

controller, and Cisco UCS P81E VIC firmware to compatible levels.

Your system firmware must be at minimum level 1.2 to use the Cisco Host Upgrade Utility. If

your firmware is prior to level 1.2, you must use the methods below to update the BIOS and

CIMC firmware individually.

You can upgrade the BIOS using the EFI interface, or upgrade from a Windows or Linux platform.

See the Cisco UCS C-Series Rack-Mount Server BIOS Upgrade Guide.

You can upgrade the CIMC and BIOS firmware by using the CIMC GUI interface. See the Cisco

UCS C-Series Rack-Mount Server Configuration Guide.

You can upgrade the CIMC and BIOS firmware by using the CIMC CLI interface. See the Cisco

UCS C-Series Rack-Mount Server CLI Configuration Guide.

The version and build of the current BIOS are displayed on the Main page of the utility.

Connecting and Powering On the Cisco SNS-3415/3495 Appliance

Installation and Upgrade Guide for Cisco Secure Access Control System 5.6

8-13