Cisco UCS B200 M3 Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Сервер Cisco UCS B200 M3. Cisco UCS B200 M3 34 страницы. Blade server
Также для Cisco UCS B200 M3: Указания по установке и обслуживанию (36 страниц), Указания по установке и обслуживанию (37 страниц), Руководство (8 страниц), Руководство по обновлению (21 страниц), Указания по установке и обслуживанию (28 страниц)

Revised: September 9, 2013, OL-26624-01

Cisco UCS B200 M3 Blade Server

The Cisco UCS B200 M3 is an Intel-based, half-width blade supporting two CPU sockets using Intel E5-2600 series CPUs and up

to 24 DIMMs; it supports one modular LOM (dedicated slot for Cisco's Virtual Interface Card) and one mezzanine adapter. At this

time, the UCS B200 M2 (second generation) server is still available and is documented elsewhere. You can install up to eight UCS

B200 Blade Servers to a UCS chassis, mixing with other models or Cisco UCS blade servers in the chassis if desired.

Figure 1: Cisco UCS B200 M3 Front Panel

Asset tag

Each server has a blank plastic tag that pulls out of the

front panel which is provided so that you can add your

own asset tracking label without interfering with the

intended air flow.

Blade ejector handle

Ejector captive screw

Hard drive bay 1

Hard drive bay 2

Power button and LED

Server LEDs indicate whether the blade server is in active or standby mode, the status of the network link, the over all health of the

blade server, and whether the server is set to give a flashing blue beaconing indication.

The removable drives also have LEDs indicating hard disk access activity and disk health.

Network link status LED

Blade health LED

Console connector

Reset button access

Beaconing LED and button