Cisco UCS C220 M3 Руководство по конфигурации - Страница 23

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Сервер Cisco UCS C220 M3. Cisco UCS C220 M3 33 страницы. Security manager 4.3
Также для Cisco UCS C220 M3: Краткое руководство по эксплуатации (29 страниц), Руководство по обновлению (10 страниц), Краткое руководство по эксплуатации (12 страниц)

Replacing a Drive and Rebuilding the Data

Drives are installed in front-panel drive bays that provide hot-pluggable access. Drives can be also removed or

swapped without shutting down the server (Figure 11).

Figure 11.

8 Hot-Swappable 2.5 inch-Drives

You can automatically replace a failed drive with a hot spare (either dedicated or global). If any drive in a RAID

virtual drive fails, a hot spare automatically takes its place, and the data on the failed drive is rebuilt on the hot

spare. Hot spares can be used for RAID 1, 5, 6, 10, 50, and 60.

Faulty or failed drives in a RAID virtual drive are hot swappable, meaning that no reboot is required to swap a failed

drive in a virtual drive. Hot swapping is supported on RAID 1, 5, 6, 10, 50, and 60.

Note:

RAID 0 does not support hot swapping.

You can track the rebuild process from the Cisco IMC.

Step 1: Log in to Cisco IMC and navigate to the Storage tab. In the example shown here, the RAID 1 virtual drive

is created by using two physical drives (drives 5 and 6).

Page 23 of 33