Cisco UCS E Series Руководство по установке - Страница 30

Просмотреть онлайн или скачать pdf Руководство по установке для Сервер Cisco UCS E Series. Cisco UCS E Series 46 страниц. Ucs e series unified computing system
Также для Cisco UCS E Series: Обзор продукции (8 страниц), Руководство по устранению неполадок (28 страниц)

Cisco UCS E Series Руководство по установке
Online Insertion and Removal
Shutting Down the E-Series Server Installed in a Cisco 3900 Series ISR G2
SUMMARY STEPS
1.
2.
3.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
ucse slot shutdown
Example:
Router# ucse 4 shutdown
Step 3
hw-module sm slot oir-stop
Example:
Router# hw-module sm 4 oir-stop
SM Hardware slot 4 can be removed
Restarting the E-Series Server Installed in a Cisco 3900 Series ISR G2
If the oir-stop command was issued and the E-Series Server was not physically removed from the slot,
you can restart the E-Series Server with the oir-start command. From a console terminal, issue the
hw-module sm slot oir-start command. The console displays the module's changing state.
Example:
Router# hw-module sm 2 oir-start
Router#
*Mar
*Mar
state to up
Inserting the E-Series Server in a Cisco 3900 Series ISR G2
The Cisco 3900 ISR G2 that is up and running can detect when an E-Series Server is inserted in the SM
slot and will automatically provide power to the server.
Hardware Installation Guide for Cisco UCS E-Series Servers
30
enable
ucse slot shutdown
hw-module sm slot oir-stop
8 05:40:19.195: %LINK-3-UPDOWN: Interface ucse2/0, changed state to up
8 05:40:20.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface ucse2/0, changed
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
Shuts down the E-Series Server gracefully.
Note
Before proceeding with the next command, verify
that the E-Series Server has shut down. When the
E-Series Server shuts down, the power LED turns
orange. You can also use CIMC to verify if the
E-Series Server has powered down.
Shuts down power to the specified E-Series Server to
prepare it for removal.
When it is safe to remove the E-Series Server, a message is
displayed as shown in the example.
Before removing the E-Series Server, verify that
Note
power to the slot is shut down. The power LED
should be off.
OL-26447-03