Cisco UCS E Series Руководство по установке - Страница 35
Просмотреть онлайн или скачать pdf Руководство по установке для Сервер Cisco UCS E Series. Cisco UCS E Series 46 страниц. Ucs e series unified computing system
Также для Cisco UCS E Series: Обзор продукции (8 страниц), Руководство по устранению неполадок (28 страниц)
Печатать страницу
Figure 15
1
Bracket
(Optional) If there is a hard disk drive, use the screwdriver to loosen the captive screws on the hard disk
Step 5
drive assembly.
(Optional) To remove the faulty hard disk, pull the handle of the hard disk drive assembly and slide out
Step 6
the hard disk drive.
Slide the new hard disk drive into the E-Series Server until it clicks into place.
Step 7
Tighten the captive screws on the new hard disk drive assembly. Make sure that the HDDs are firmly
Step 8
secure to the carrier to avoid rattling during operation.
Replace the faceplate.
Step 9
Restart the E-Series Server.
Step 10
Configure the new HDD as the new hotspare disk drive. For the configuration procedure, see the GUI
Step 11
Configuration Guide for UCS E-Series Servers Integrated Management Controller.
OL-26447-03
Empty HDD2 Slot
2
1
Installing or Replacing Hard Disk Drives on the E-Series Servers
2
Captive screws on hard disk drive assembly
Hardware Installation Guide for Cisco UCS E-Series Servers
35