Cisco 1700 series Руководство по установке оборудования - Страница 15

Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Шлюз Cisco 1700 series. Cisco 1700 series 46 страниц. Secure firewall management center
Также для Cisco 1700 series: Руководство по нормативному соответствию и безопасности (45 страниц), Руководство (15 страниц), Руководство по конфигурации (25 страниц), Примечание по применению (41 страниц), Поиск и устранение неисправностей оборудования (12 страниц), Обзорное руководство (13 страниц), Настройка (34 страниц), Руководство (5 страниц), Краткое руководство по эксплуатации (6 страниц)

Печатать страницу
Cisco 1700 series Руководство по установке оборудования
Overview
5
System status LED:
7
Fan status LED:
Temperature status LED:
9
• Green—The chassis is running in normal
operating condition.
• Green, flashing—The chassis is performing
system initialization and memory check.
• Amber—The chassis is in a degraded
operational state (minor fault).
• Power supply redundancy is lost.
• CPUs are mismatched.
• At least one CPU is faulty.
• At least one DIMM is faulty.
• At least one drive in a RAID
configuration failed.
• Amber, two flashes—There is a major fault
with the system board.
• Amber, three flashes—There is a major fault
with the DIMMs.
• Amber, four flashes—There is a major fault
with the CPUs.
• Green—All fans are operating properly.
• Amber, flashing—One or more fans
breached the unrecoverable threshold.
• Green—The chassis is operating at normal
temperature.
• Amber—One or more temperature sensors
breached the critical threshold.
• Amber, flashing—One or more temperature
sensors breached the unrecoverable
threshold.
Cisco Secure Firewall Management Center 1700, 2700, and 4700 Hardware Installation Guide
6
Power supply status LED:
• Green—All power supplies are operating
normally.
• Amber—One or more power supplies are in
a degraded operational state.
• Amber, flashing—One or more power
supplies are in a critical fault state.
8
Network link activity LED:
• Off—The Ethernet port link is idle.
• Green—One or more Ethernet ports are
link-active, but there is no activity.
• Green, flashing—One or more Ethernet ports
are link-active with activity.
—
Front Panel LEDs
11