Epson GT-2500 Series Информация о продукте - Страница 9

Печатать страницу

Epson GT-2500 Series Информация о продукте

After trying these solutions, turn off the scanner using its power

button, then turn it back on. If the

still flashing:

❏ The scanner may be malfunctioning.

❏ The scanner lamp may need to be replaced (not a user-

replaceable part).

❏ The ADF may be malfunctioning.

Cleaning the Scanner

To keep your scanner operating at its best, clean it periodically

using the following procedure.

1. Turn off the scanner using its power button.

2. Unplug the AC adapter cord from the scanner.

3. Clean the outer case with a cloth dampened with mild

detergent and water.

4. If the glass surface of the document table gets dirty, clean it

with a soft dry cloth. If the glass surface is stained with

grease or some other hard-to-remove material, use a small

amount of glass cleaner and a soft cloth to remove it. Do

not apply cleaner directly to the glass; apply it to the cloth

and then clean the glass. Wipe off any remaining moisture.

Make sure that no dust builds up on the surface of the

document table. Dust can cause spots in your scanned

images.

5. If the underside of the ADF gets dirty, clean it as described

in step 4. Also be sure to clean the left side of the document

table.

Left side

of the

document

table

and

lights are

Ready

Error

New :For a single scanner

Underside of

the ADF

Caution:

Do not press the glass surface of the document table with any

force.

Be careful not to scratch or damage the glass surface of the

document table, and do not use a hard or abrasive brush to clean it.

A damaged glass surface can decrease the scan quality.

Never use alcohol, thinner, or corrosive solvent to clean the

scanner. These chemicals can damage the scanner components

and the case.

Be careful not to spill liquid into the scanner mechanism or

electronic components. This could permanently damage the

mechanism and circuitry.

Do not spray lubricants inside the scanner.

Never open the scanner case.

Transporting the Scanner

Before transporting the scanner for a long distance or storing it

for an extended period of time, you need to lock the scanner's

carriage to prevent damage.

1. Plug in the scanner, connect it to your computer, turn on

the scanner using its power button, and wait until the lights

stop flashing.

2. When the

Ready

it's power button.

3. On the side of the scanner, slide the transportation lock to

the locked position to secure the scanner carriage.

4. Attach the protective materials, then repack the scanner in

its original box or a similar box that fits the scanner snugly.

7/06

Epson GT-2500 and GT-2500 Plus - 9

Epson GT-2500 and GT-2500 Plus

light is green, turn off the scanner using