Cisco AS5400XM Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Шлюз Cisco AS5400XM. Cisco AS5400XM 16 страниц.

Chapter 3

Installing the Cisco AS5400XM Universal Gateway

Figure 3-5

Note: The second bracket attaches to the rack at the other side

Connecting to the Network

This section describes how to connect the Cisco AS5400XM universal gateway to your network. The

cables required to connect to a network are not provided. For ordering information, contact customer

service (see the

Specifications,"

Warning

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network

voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some

LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021

Do not work on the system or connect or disconnect cables during periods of lightning activity.

Warning

Statement 1001

Caution

If the Cisco AS5400XM universal gateway is configured with fewer than seven DFCs, make sure that a

blank slot cover is installed over each open slot to ensure proper airflow.

The Cisco AS5400XM universal gateway arrives with all carrier cards and DFCs already installed,

Note

unless you order a card separately as a spare. See the Cisco AS5350XM and Cisco AS5400XM Universal

Gateways Card Installation Guide for card installation instructions.

OL-6418-02

Attaching the Chassis to the 19-Inch Rack—Rear Panel Forward

of the chassis. The brackets can also be installed with the

front panel forward.

"Obtaining Technical Assistance" section on page

for cable and port pinouts.

Cisco AS5400XM Universal Gateway Chassis Installation Guide

Connecting to the Network

xvi) or see

Appendix C, "Cabling

3-5