Cisco Firepower 1600 Руководство по установке оборудования - Страница 28

Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Шлюз Cisco Firepower 1600. Cisco Firepower 1600 44 страницы.

Installation Warnings

Warning

Statement 1004—Installation Instructions

Read the installation instructions before using, installing or connecting the system to the power source.

Warning

Statement 12—Power Supply Disconnection Warning

Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect

the power at the circuit breaker on DC units.

Warning

Statement 43—Jewelry Removal Warning

Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,

and watches). Metal objects will heat up when connected to power and ground and can cause serious burns

or weld the metal object to the terminals.

Warning

Statement 94—Wrist Strap Warning

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch

the backplane with your hand or any metal tool, or you could shock yourself.

Warning

Statement 1045—Short-Circuit Protection

This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.

Install only in accordance with national and local wiring regulations.

Warning

Statement 1021—SELV Circuit

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage

(TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and

WAN ports both use RJ-45 connectors. Use caution when connecting cables.

Warning

Statement 1024—Ground Conductor

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence

of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician

if you are uncertain that suitable grounding is available.

Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide

Installation Preparation