Cisco Firepower 1600 Руководство по установке оборудования - Страница 40

Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Шлюз Cisco Firepower 1600. Cisco Firepower 1600 44 страницы.

Remove and Replace a Drive

• Emergency shutdown—Press and hold the Power button for four seconds to force the main power off and immediately

enter standby mode.

Remove and Replace a Drive

Note

The drives are hot-swappable. You do not have to shut down the FMC to remove or replace drives.

Note

You cannot add more drives to your FMC. You can only replace the drives in the slots that are supported for

your model.

Before you begin

Warning

Statement 1018—Supply Circuit

To reduce risk of electric shock and fire, take care when connecting units to the supply circuit so that wiring

is not overloaded.

Warning

Statement 1019—Main Disconnecting Device

The plug-socket combination must be accessible at all times, because it serves as the main disconnecting

device.

Warning

Statement 1024—Ground Conductor

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence

of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician

if you are uncertain that suitable grounding is available.

Warning

Statement 1030—Equipment Installation

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Warning

Statement 1073—No User-Serviceable Parts

No serviceable parts inside. To avoid risk of electric shock, do not open.

Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide

Maintenance and Upgrade