Cisco Linksys WAG325N Руководство пользователя - Страница 27
Просмотреть онлайн или скачать pdf Руководство пользователя для Шлюз Cisco Linksys WAG325N. Cisco Linksys WAG325N 50 страниц. 2.4ghz wireless-n adsl2+
Печатать страницу
Wireless-N ADSL2+ Gateway
The Wireless Tab
The Basic Wireless Settings Tab
This screen allows you to choose your wireless network mode and wireless security.
Wireless Network
• Network Mode. If you have 802.11g and 802.11b devices in your network, then keep the default setting,
Mixed. If you have only Wireless-G devices, select Wireless-G Only. If you have only Wireless-B devices,
select Wireless-B Only. If you have only Wireless-N devices, select Wireless-N Only. If you want to disable
wireless networking, select Disable.
• Network Name (SSID). Enter the name for your wireless network into the field. The SSID is the network name
shared among all devices in a wireless network. It must be identical for all devices in the wireless network. It
is case-sensitive and must not exceed 32 alphanumeric characters, which may be any keyboard character.
Linksys recommends that you change the default SSID (linksys) to a unique name of your choice.
• Radio Band. For best performance in a network using Wireless-N, Wireless-G and Wireless-B devices, keep
the default, Wide - 40MHz Channel. For Wireless-G and Wireless-B networking only, select Standard -
20MHz Channel.
• Wide Channel. If you selected Wide - 40MHz Channel for the Radio Band setting, then this setting will be
available for your primary Wireless-N channel. Select any channel from the drop-down menu.
• Standard Channel. Select the channel for Wireless-N, Wireless-G, and Wireless-B networking. If you selected
Wide – 40MHz Channel for the Radio Band setting, then the Standard Channel will be a secondary channel for
Wireless-N. If you are not sure which channel to select, do not make any changes.
• Wireless SSID Broadcast. When wireless computers or clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the Gateway. To broadcast the Gateway's SSID, keep
the default setting, Enable. If you do not want to broadcast the Gateway's SSID, then select Disable.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes. Click Help for more information.
Chapter 5: Configuring the Wireless-N ADSL2+ Gateway
The Wireless Tab
Figure 5-13: Basic Wireless Settings
NOTE: If you select Wide - 40MHz Channel for the
Radio Band setting, then Wireless-N can use two
channels: a primary one (Wide Channel) and a
secondary one (Standard Channel). This will
enhance Wireless-N performance.
21