Acuity Brands nLight rIO Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Контроллер Acuity Brands nLight rIO. Acuity Brands nLight rIO 3 страницы. Fixture embedded nlight air network interface

Печатать страницу

SPECIFICATIONS (rIO)

Electrical Specifications

Mechanical

Environmental

Warrantied Operating Temperature

Contains FCC ID: 2ADCB-RMODIT or 2ADCB-RES7CD

Contains IC: 6715C-RMODIT or 6715C-RES7CD

IFT #: RCPACRM18-1879 or RCPACRE21-0154

Acuity Brands Lighting Inc. RMODIT or RES7CD

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o

dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia,

incluyendo la que pueda causar su operación no deseada.

In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the

radiator shall not be less than 20cm during normal operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION

• To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards please read all warnings and instructions included with and on the fixture box

and all fixture labels.

• Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.

• Installation and service should be performed by a qualified licensed electrician.

• Maintenance should be performed by qualified person(s) familiar with the products' construction & operation & any hazards involved. Regular maintenance programs recommended.

• DO NOT INSTALL DAMAGED PRODUCT! This product has been properly packed so that no parts should have been damaged during transit. Inspect to confirm. Any part damaged or broken during or after assembly

should be replaced.

CAUTION: RISK OF PRODUCT DAMAGE

√ Electrostatic Discharge (ESD): ESD can damage product(s). Personal grounding equipment should be

worn during all installation or servicing of the unit.

√ Do not touch individual electrical components, as this can cause ESD and affect product performance.

√ Do not stretch or use cable sets that are too short or are of insufficient length.

√ Do not tamper with contacts.

√ Do not modify the product.

√ Do not change or alter internal wiring or installation circuitry.

√ Do not use product for anything other than its intended use.

IS-RIO-002

rIO Controller

Fixture Embedded nLight AIR Network Interface

LOW VOLTAGE

WIRELESS

•

Input Ratings

5 - 60 VDC

Maximum Load

0.65 W

Dimming Load

Sinks <20mA (0-10 VDC LED Drivers/Ballasts)

Minimum Load

None

Class Rating

Class 2

Mounting

Fixture-Mounted

Connection Type

Low Voltage Leads

-40º to 185º F (-40º to 85º C)

Standards/ Ratings

RoHS, UL 916, UL 924 (optional), FCC / IC / IFETEL

READ AND FOLLOW ALL SAFETY INSTRUCTIONS!

TITLE 20/24

WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY

• DO NOT MOUNT NEAR GAS OR ELECTRIC HEATERS.

• EQUIPMENT SHOULD BE MOUNTED IN

• THE USE OF ACCESSORY EQUIPMENT NOT

Full warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Actual performance may differ as a result of end-user environment and application.

WARNING - RISK OF ELECTRIC SHOCK

√ Disconnect or turn off power before installation or servicing.

√ Verify that supply voltage is correct by comparing it with the

product information.

√ Make all electrical and grounded connections in accordance with

the National Electrical Code (NEC) and any applicable local code

requirements.

√ All wiring connections should be capped with UL approved

recognized wire connectors.

√ All unused connector openings must be capped.

IMPORTANT SAFEGUARDS

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED

INCLUDING THE FOLLOWING:

LOCATIONS AND AT HEIGHTS WHERE IT WILL NOT

READILY BE SUBJECTED TO TAMPERING BY

UNAUTHORIZED PERSONNEL.

RECOMMENDED BY THE MANUFACTURER MAY

CAUSE AN UNSAFE CONDITION.

WARRANTY

5-year limited warranty.

Note: Specifications subject to change without notice.

WARNING - RISK OF BURN or FIRE

√ Do not exceed maximum wattage, ratings, or published

operation conditions of product.

√ Do not overload.

√ Follow all manufacturer's warnings, recommendations

and restrictions to ensure proper operation of product.

CAUTION - RISK OF INJURY

√ Wear gloves and safety glasses at all times when

installing, servicing or performing maintenance.

1 of 3