Cisco VG400 series Руководство по настройке программного обеспечения - Страница 13
Просмотреть онлайн или скачать pdf Руководство по настройке программного обеспечения для Шлюз Cisco VG400 series. Cisco VG400 series 22 страницы. Voice gateway
Также для Cisco VG400 series: Руководство по установке оборудования (40 страниц), Установка (13 страниц)
Печатать страницу
Configuring with the Command-Line Interface
Command or Action
Step 6
Router(config-line)# exit
Verifying the Host Name and Password
To verify that you configured the correct host name and password, perform the following steps:
SUMMARY STEPS
1. Enter the show config command:
2. Exit global configuration mode and attempt to re-enter it using the new enable password:
DETAILED STEPS
Step 1
Enter the show config command:
Example:
Router# show config
Using 2745 out of 262136 bytes
!
version XX.X
.
.
.
!
hostname 450
!
enable secret 5 $1$60L4$X2JYOwoDc0.kqa1loO/w8/
.
.
.
Check the host name and encrypted password displayed near the top of the command output.
Step 2
Exit global configuration mode and attempt to re-enter it using the new enable password:
Example:
Router# exit
.
.
.
Router con0 is now available
Press RETURN
to get started.
Router> enable
Password: guessme
Router#
If you face any issues, check whether:
• Caps Lock is off.
Verifying the Host Name and Password
Purpose
Exits from the config-line mode and enters into the global
configuration mode.
Cisco VG400 Voice Gateway Software Configuration Guide
7