DIGIWAY PTY P750 Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Открыватель двери гаража DIGIWAY PTY P750. DIGIWAY PTY P750 13 страниц. Sliding gate motor
Также для DIGIWAY PTY P750: Руководство по эксплуатации (12 страниц)
Печатать страницу1. General Descriptions
The P550, P550-2 and P750 sliding gate motors was designed for heavy duty industry track gate or
cantilever gate. Heavy duty three phase industry motor driven by VSD (variable speed drive), gate can
run at different speeds. Built in encoder and intelligent controller combination can make the gate
running more smoothly. The controller can receive the signals from swipe card, loop detectors, remote
control, photo-electric beams and any kind of access control system. Galvanised metal sheet and
powder coated high quality cabinet(1.5mm thickness) has remove door (P750) and plenty of room for
the access control accessaries including din rail mounting. 50VA transformer (12V/24v/2A) can
directly drive magnetic lock, warning lights etc.
2. Technical Specifications
Power supply
Output voltage
Motor rate
Gate type
Drive speed
Max. Gate length
Fully programmable
Accessories power supply
3. Control Board layout
Push Button
Limit SW Input
(Open PEB &
Safety switch)
Inputs Display
PE Bypass
Control Inputs
12VAC power
DIGIWAY PTY LTD
CONTROL INPUIT AND BUTTON
230/240V AC at 10A
230V AC three phase (via) inverter, Max. 0.75KW
Three phase two poles 0.55KW (P550) or 0.75KW (P750)
Track or cantilever
Up to 700mm/sec (with big drive gear)
No limitation
Auto close time, PE trig close time etc.
12V@2A or 24@2A, Max. 50VA, protected by 1A fuse
Fig-2
4
DIP SW
Gate Status Output
Output dis. Leds
Lock/Light Output
Output to Inverter
Encoder plug