Epson CX4200 - Stylus Color Inkjet Инструкция по установке - Страница 6

Просмотреть онлайн или скачать pdf Инструкция по установке для Аксессуары для принтеров Epson CX4200 - Stylus Color Inkjet. Epson CX4200 - Stylus Color Inkjet 7 страниц. Continuous ink supply system for xm prefilled version with auto reset chips
Также для Epson CX4200 - Stylus Color Inkjet: Краткое руководство (48 страниц), Начните здесь Руководство (8 страниц), Технический обзор (6 страниц), Руководство пользователя (18 страниц), Обновление (1 страниц)

9、Ninth step: Checking the Printing head

Enter Printer service

If there shows any breaks (maybe it caused by air bubbles in the printing head), please

clean your printing head. If it is still shown little breaks, especially only for one color, it is

unnecessary to repeatedly clean printer-head. Just keep the printer unuse for about one

hour, If it is still abnormal, please kindly contact local dealer.

Reset Procedure:

If the indicator light flashing when printing, it tells that you need to reset the chip to full

status. Please turn off your printer for about 1 minutes and switch it back on. Ink meter bar

shall show full ink. You can start printing as usual.

Refill Ink:

Please pay attention to the ink level in the reservoirs; if the ink level is below 1CM as the

above picture shown, please use refill kits to fill ink into Reservoir bottles. Carefully pull out

Get other manuals https://www.bkmanuals.com

Printing Head Normal

Printing testing normal， Begin to

Printing Head printing Break

Printing Break ，Clear the printer

head