Epson GQ-3500 Бюллетень поддержки продуктов - Страница 7

Просмотреть онлайн или скачать pdf Бюллетень поддержки продуктов для Аксессуары для принтеров Epson GQ-3500. Epson GQ-3500 27 страниц. Product support bulletin(s)
Также для Epson GQ-3500: Руководство пользователя (13 страниц), Бюллетень поддержки продуктов (3 страниц), Бюллетень поддержки продуктов (8 страниц), Бюллетень поддержки продуктов (20 страниц), Бюллетень поддержки продуктов (14 страниц), Бюллетень поддержки продуктов (25 страниц), Бюллетень поддержки продуктов (13 страниц), Бюллетень поддержки продуктов (2 страниц)

Печатать страницу
Epson GQ-3500 Бюллетень поддержки продуктов

RECOMMENDED PREVENTATIVE MAINTENANCE

PRINT
COLLECTOR
UNIT
DEVELOPER
UNIT
INNER
SURFACES
CHARGE/TRANSFER
CORONAS
The proper cleaning and/or timely replacement of the above
items will insure a long and productive printer life.
CLEANING PROCEDURE
Turn off the power switch and open the printer clamshell case.
Remove the Drum/Collector. Grasp the two green tabs and lift.
Place the Drum/Collector on sheets of paper. AVOID STROM LIGHT.
Transfer Charger Wire Cleaning - Use the small cleaning tool
stored inside the printer.
printer to the right of the toner cartridge. Refer to page 5-16
of the GQ-3500 Users Manual for complete transfer charger wire
cleaning instructions.
Reinstall the Drum/Collector unit into the printer after
cleaning the transfer charger wire.
Collector Unit Cleaning - Separate the Print Drum from the
Collector unit. This is accomplished by compressing both of the
green spring loaded clamps on the Collector and lifting, leaving
the Print Drum in the Processing Tray. Cover the Drum with sheets
of paper to avoid excess exposure to light. Inspect the Collector
cleaning blades for excess toner which may clog the opening (the
blades contact the Print Drum when the Drum is attached).
Carefully shake or brush off excess toner into a waste basket. The
cleaning blades are fragile and will render the Collector useless
if damaged. Inspect the charge corona wire located above the metal
grid. Make sure it is not broken.
EPSON AMERICA SERVICE, 23610 TEL0 AVENUE, TORRANCE, CALIF. 90505
OUST OFF EXCESS TONER
DUST, WIPE OR VACUUM OFF
EXCESS TONER
INSPECT TONER ROLLER FOR
UNEVEN TONER DISTRIBUTION
WIPE UP ACCUMULATED TONER
INSPECT FOR BROKEN OR
CORONA WIRES
MISSING
is located at the front of the
It
TOOLS USED
SOFT CLOTH OR
TISSUE
SOFT BRUSH, TOWEL
OR VACUUM
NONE
SOFT TOWEL
OR VACUUM
NONE