Epson LQ-1170 Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары для принтеров Epson LQ-1170. Epson LQ-1170 1 страница. Understanding and using escp/3 commands and syntax
Также для Epson LQ-1170: Руководство (5 страниц), Бюллетень поддержки продуктов (20 страниц), Бюллетень поддержки продуктов (5 страниц), Технический обзор (7 страниц), Руководство по сборке (8 страниц), Бюллетень поддержки продуктов (16 страниц), Бюллетень поддержки продуктов (20 страниц)

How to install EpsonTalk LQ in 5 EASY steps:

Check list : (you need these things)

Epson LQ - 570, 1070 ,870, or 1170

EpsonTalk board

Local talk cable (8 pin to 8 pin mini din)

Macintosh, Phillips screwdriver

Verify the printer and the Mac are off.

1) Insert EpsonTalk board into the printer.

(just plugs into optional i/f slot)

2) Plug Localtalk cable into Printer port on Mac

and Appleltalk port (on left) on printer.

3) (System 7 only) Copy the three files from the

Epson Print disk into the system, extensions folder.

3) (System 6 only) Start the Mac with Comunications

Toolbox disk and run installer (creates folder) Insert

the Epson Print disk and copy Epson Tool to

communications folder. Copy EPSON ESC/P 2 NET

and EPSON NAMER to the Mac's System folder.

Restart the Mac.

4) Turn the printer on and run Epson namer and

choose Epson when it appears in the namer window.

then quit the Epson namer.

5) Open Chooser under Apple menu (Upper

left of Mac screen) and enable Appletalk. Select

Epson ESC/P 2 NET then Epson will appear in the

Chooser window . Select it and your done.