Inserting a CD or DVD
Make sure the data, music, or video is burned on your ink
jet-printable CDs or DVDs before you print. Otherwise, dirt
or scratches on the surface may cause errors when you burn
the data. If you plan to print a large number of CDs or DVDs,
it's a good idea to print a small sample, then wait a day and
check the quality to make sure it's satisfactory.
If you want to check the print position or color, see your
Printer Basics book.
Before you insert a CD or DVD, make sure the printer is
turned on. Otherwise, the disc may not be positioned
correctly. Then follow these steps:
1. Push in the output tray extension, but leave the tray open.
2. Open the printer cover and pull down the CD/DVD tray
guide.
3. Place the CD or DVD on the CD/DVD tray with the white
or printable side face-up. Make sure the disc lays flat in the
tray.
To print on a small CD (8-cm), place the small CD ring on
the tray first, then place the CD inside the ring.
Caution: Make sure you always use the small CD ring when
printing on 8-cm CDs and that the CD and ring lay flat on the tray,
otherwise the printer may be damaged.
4. Insert the tray carefully, making sure it's level, not tilted up
5. Follow the instructions in "Printing Your Design" on
Designing CDs and DVDs
You can use the EPSON Print CD program (included on the
Printer Software CD-ROM) to create and print a design with
images, graphics, and text. See your Printer Basics book for
instructions.
Printing Your Design
After you have created your design and loaded a CD or DVD,
you're ready to print. Follow the steps for your operating
system below.
Windows
1. Open the File menu and select
Always use this
piece with 8 cm CDs
11/03
EPSON Stylus Photo R200
or down. Push the tray under the tab and the two rollers.
Don't push the tray in too far and make sure that the arrows
line up exactly.
page 7 to print with EPSON Print CD.
EPSON Stylus Photo R200
Printer Settings.
- 7
Печатать страницу