Argos PAT88V3FP Инструкции по сборке - Страница 4

Просмотреть онлайн или скачать pdf Инструкции по сборке для Наружная отделка Argos PAT88V3FP. Argos PAT88V3FP 4 страницы. Patio deck kit 8 x 8

Cut 50mm off four of the

balusters (

BAL900BI

Attach the 50mm block to

the outer edge of the

uprights on top of the

decking. Secure using

1x60mm screw for each.

Step 5

Step 6

Attach the remaining Baluster's (BAL900BI) evenly across each Handrail assembly. Secure using

1x50mm screw top and bottom. Make sure the gaps are evenly spaced but the gaps are no greater

than 99mm.

Position the second correctly sized Handrail

support onto the trimmed battens and secure in

the same manner as the bottom Hand Rail

Support.

Position a handrail support

(

DR7028BI

) on top of the

blocks. You will need to cut

down the rail supports and

handrail to the sizes shown

on the assembly below in

order for them to fit between

the uprights. Secure the

support either end with

1x70mm screw

Attach the correctly sized Handrail to the top

using 4 x 40mm screws evenly space across

Cut 4 balusters you have

already trimmed to 785mm

and place these on top of

the supports. Secure using

2 x 60mm screws one at the

top and one at the bottom of

the trimmed batten.

each Handrail.

40mm

60mm

70mm

50mm

Fix using 80 x 50mm screws

Issue 0112