Crow EDS-2000AM Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары Crow EDS-2000AM. Crow EDS-2000AM 18 страниц. Outdoor pir + mw detector
Также для Crow EDS-2000AM: Руководство по установке (18 страниц), Инструкции по установке и руководство пользователя (20 страниц)

Detector Installation

Important! Prior to installation, read both "Operation" and "Selecting the mounting location"

sections carefully.

1. Install the detector in such manner that the intruder is

most likely to cross the detection area from side to side.

3. Make sure to attach the metal bracket to a leveled

straight and firm wall, leaving 10cm (3.9 inches) from

the top and 10cm (3.9 inches) from both sides, for easy

installation and maintenance.

5. Open the detector unwinding the bottom screw.

P/N: 7101796A

2. The detector is to be installed at height of 1.8 to 2.4

meters (5.9 to 7.8 ft) , ideally 2.1m (6.8 ft)

4. Placing the detector on perpendicular wall is

required for guarding a side window opening.

Alternately the LC-B1-15X Outdoor Mounting bracket

can be installed on the same wall, allowing the

detector beam to be rotated towards the window.

6. Release the rear metal bracket by unwinding

internal bottom screw.